Flywheel Housing Runout
Usage:
Face Runout (Axial Eccentricity) Of The Flywheel Housing:
8T5096 Dial Indicator Group Installed
1. Fasten a dial indicator to the crankshaft flange so the anvil of the indicator will touch the face of the flywheel housing.
2. Put a force on the crankshaft toward the rear before reading the indicator at each point.
3. With dial indicator set at 0.0 mm (.00 in) at location (A), turn the crankshaft and read the indicator at locations (B), (C) and (D).
4. The difference between lower and higher measurements taken at all four points must not be more than 0.38 mm (.015 in), which is the maximum permissible face runout (axial eccentricity) of the flywheel housing.
Caterpillar Information System:
3406B DIESEL TRUCK ENGINE Flywheel Housing Bore
3406B DIESEL TRUCK ENGINE Oil Cooler Bypass Valve
3406B DIESEL TRUCK ENGINE BrakeSaver Fastener Group
3406B DIESEL TRUCK ENGINE BrakeSaver Control Valve
3406B DIESEL TRUCK ENGINE BrakeSaver Group
3406B DIESEL TRUCK ENGINE Flywheel Adapter Group
3406B DIESEL TRUCK ENGINE Flywheels
3406B DIESEL TRUCK ENGINE Flywheel Housing
3406B DIESEL TRUCK ENGINE Pulley And Damper Groups
3406B DIESEL TRUCK ENGINE Pulley Tightener Group
3406B DIESEL TRUCK ENGINE Accessory Drive Groups
3406B DIESEL TRUCK ENGINE Crankshaft
3406B DIESEL TRUCK ENGINE Flywheel Runout
3406B DIESEL TRUCK ENGINE Alternators And Regulators
3406B DIESEL TRUCK ENGINE Electric Starter Motors
3406B DIESEL TRUCK ENGINE Starter Solenoids
3406B DIESEL TRUCK ENGINE Shutoff Solenoids
3406B DIESEL TRUCK ENGINE Systems Operation
3406B DIESEL TRUCK ENGINE Testing And Adjusting
3406B DIESEL TRUCK ENGINE Introduction
3406B DIESEL TRUCK ENGINE High Fuel Consumption
3406B DIESEL TRUCK ENGINE High Fuel Consumption Complaints
3406B DIESEL TRUCK ENGINE Low Power And Engine Response Complaints
3406B DIESEL TRUCK ENGINE Low Power Complaints