3304 & 3306 INDUSTRIAL & MARINE ENGINES Caterpillar

1. Put identification on the wires for the starting motor as to their location on the starting motor. Disconnect wires (1) to the starting motor.

2. Fasten a strap and hoist to remove the starting motor. Remove three bolts (2), starting motor (3) and gasket. The weight of the starter is 64 lb. (29 kg).

Install Electric Starting Motor

1. Install gasket and starting motor (1) in position in flywheel housing. Install three bolts to hold starting motor in place.

2. Connect wires (2) to the starting motor.