Service Brake Control
Show/hide table
Illustration 1 | g00632482 |
Show/hide table
Illustration 2 | g00632484 |
(1) Tighten the nuts until the rubber clamps contact each other.
(2) Assembled length of rod from the centerline of the pin hole to the centerline of the pin hole on the remaining end is 530 ± 2 mm (20.9 ± .1 inch).
Caterpillar Information System:
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Circuit Breakers - Reset
IT14G Integrated Toolcarrier Roading the Machine
928G Wheel Loader Shipping the Machine
120H and 135H Motor Graders Air System and Brakes Air Control Valve (Parking Brake)
120H and 135H Motor Graders Air System and Brakes Parking Brake
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Fuses - Replace
12H, 140H and 160H Motor Graders Air System and Brakes Parking Brake Solenoid Valve
928G Wheel Loader Walk-Around Inspection
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Specifications
966G and 972G Wheel Loaders Bucket Loading from a Bank
966G and 972G Wheel Loaders Bucket Loading Hauling Units
966G and 972G Wheel Loaders Bucket Loading from a Stockpile
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Hydraulic System Oil Level - Check
561M Pipelayer Radiator Pressure Cap - Clean/Replace
561M Pipelayer Radiator Core - Clean
120H and 135H Motor Graders Air System and Brakes Service Brakes
446B Backhoe Loader Torques for Standard Worm Drive Band Hose Clamps
938G Wheel Loader and IT38G Integrated Toolcarrier Bucket Wear Plates - Inspect/Replace
446B Backhoe Loader Torques for Metric Fasteners
584 and 584HD Forwarders Tire Inflation Pressure Adjustment
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Window Wiper - Inspect/Replace
928G Wheel Loader Steering Control
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Window Washer Reservoir - Fill
IT62G Series II Integrated Toolcarrier Tire Inflation - Check