1673 DIESEL TRUCK ENGINE Caterpillar


Timing Gears

Usage:

(1) Torque-accessory drive gear nut ... 100 ± 10 lb. ft.(13,8 ± 1,4 mkg)

(2) Clearance-camshaft end ... .004-.010 in.(0,1-0,3 mm)

Maximum permissible end clearance ... .025 in.(0,63 mm)

(3) Diameter-camshaft bearing journal ... 2.3105-2.3115 in.(58,69-58,71 mm)

Clearance-bearing ... .002-.006 in.(0,05-0,15 mm)

Maximum-permissible bearing clearance ... .008 in.(0,2 mm)

(4) Clearance-idler gear end ... .004-.016 in.(0,10-0,40 mm)

(5) Bore-idler gear bearing ... 1.376-1.380 in.(34,96-35,06 mm)

Clearance-bearing to shaft ... .002-.006 in.(0,04-0,14 mm)

(6) Torque-pulley retaining bolt ... 230 ± 20 lb. ft.(31,8 ± 2,8 mkg)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.