Valve Lifters
Usage:
Remove And Install Valve Lifters
start by:
a) remove cylinder heads
1. Remove valve lifters (2) with magnet (1).
2. Put identification on each lifter as to its location in the engine for installation purposes.
3. Put clean engine oil on the valve lifters and camshaft lobes.
4. Install the valve lifters (2) in their original positions in the cylinder block.
end by:
a) install cylinder heads
Caterpillar Information System:
3208 TRUCK ENGINE Pistons
3208 TRUCK ENGINE Cylinder Heads
3208 TRUCK ENGINE Fuel Injection Nozzles
3208 TRUCK ENGINE Rocker Shafts
3208 TRUCK ENGINE Rocker Shafts And Push Rods
3208 TRUCK ENGINE Crankcase Ventilator Valve
3208 TRUCK ENGINE Valve Covers
3208 TRUCK ENGINE Water Pump
3208 TRUCK ENGINE Water Temperature Regulators
3208 TRUCK ENGINE Connecting Rod Bearings
3208 TRUCK ENGINE Crankshaft Main Bearing
3208 TRUCK ENGINE Oil Pan
3208 TRUCK ENGINE Crankshaft Pulley
3208 TRUCK ENGINE Crankshaft Front Seal
3208 TRUCK ENGINE Timing Gear Cover And Oil Pump
3208 TRUCK ENGINE Oil Pump And Relief Valve
3208 TRUCK ENGINE Camshaft And Gears
3208 TRUCK ENGINE Automatic Timing Advance
3208 TRUCK ENGINE Flywheel
3208 TRUCK ENGINE CRANKSHAFT REAR SEAL AND WEAR SLEEVE
3208 TRUCK ENGINE Flywheel Housing
3208 TRUCK ENGINE Crankshaft And Gear
3208 TRUCK ENGINE Camshaft Bearings
3208 TRUCK ENGINE General Information