Engine Overhaul Kits for
3306 MACHINE ENGINES

With the overwhelming acceptance of the previously announced Precious Metals Kits for the on-highway truck program, Caterpillar is pleased to expand the overhaul kit offerings to support 3306 machine engines. The improved kits provide all of the parts necessary to do an engine overhaul based on the customer or dealer needs.  Time spent researching and ordering individual parts can be eliminated with prepackaged groups that can be stocked to meet immediate customer needs.

All kit consist information and model effectiveness can be viewed in SISWEB (See “Where to Identify Available Kits” below). The following charts and tables are also available in this IRM as a reference, but refer to SISWEB for up-to-date consist and model effectivity:

Appendix A: Kit Coverage Chart
Appendix B: Related Parts Order Matrix
Appendix C: Kit Consist Information

There are 4 levels of kits: Bronze, Silver, Gold and Platinum.

 
• Bronze Level – The basic building block for all four levels, the Bronze Precious Metals Level includes all the parts necessary for a low-cost repair, and additional value-added components like rod bearings. It also includes components you might not think about replacing – such as fasteners, studs, bearings and thermostat – that could lead to costly failures and unplanned downtime if not replaced, and the required gaskets and seals to reassemble the engine (out-of-frame rebuild kit).

• Silver Level – Building from the Bronze Level, a cost-effective option for a basic rebuild, the Silver Level includes: new pistons, liners, wrist pins, rings, retainers and a rod-less, unassembled cylinder pack.

• Gold Level – Building on the Bronze Level, a basic engine rebuild that gets you back to work quickly and affordably. The Gold Level includes: CatÒ Reman Cylinder Liner pack assemblies – pre-assembled with rods, pistons, rings and liners – saving four to six hours labor compared to Silver Level.

• Platinum Level – The Platinum Level is the most complete option; designed to maximize the built-in second and third life of your engine. 

Appendix A includes a table showing the effectivity of the kits to engine arrangements. If your engine arrangement is not in the list of verified arrangements, one of the rebuild kits still could apply but will require you to validate the kit consist for your specific engine arrangement parts requirements. If assistance is needed to verify if a specific kit will work, you can contact the following call center:

Reman Technical Help Line          1-888-88-Reman (1-888-887-3626)

Where to Identify Available Kits

These overhaul kits are being published in the parts manuals within SISWEB to allow users to easily identify the specific consist of each kit. To find the kits available for a specific engine, there are a couple of options - Engine Rebuild Kits / Related Parts Selector Tool  and SISWEB.

There are two ways to get to the Engine Rebuild Kits / Related Parts Selector Tool. One way is through our Dealer.cat.com website and the other is through SIS WEB. Both URL’s are below.

• Dealer.Cat.Com Website

- https://dealer.cat.com/cda/alias/related website

• SIS WEB “Under Additional Service Information”

- https://sis.cat.com URL
- https://sis.cat.com/sisweb URL

                      Select view more

                      Select the box next to Engine Rebuild Kits / Related Parts Selector Tool

The URL will appear under the Additional Service Information for easy access
        “Only three URL’s can be displayed at one time”

The URL can be bookmarked for reference

Step 1: Select the Industry, for this example we used GC&I Machines

Step2: Select the Sales Model

Step 3: Select the Machine Serial Number Prefix

Step 4: Select the Engine Model

Step 5: Select the Engine Arrangement

Step 6: After selecting all the filters, data will be displayed in the following manner

Step 7: Select Export button to view the data in a detailed report format

Step 8: Following is the detailed report for the selected values in the filter

8.1 Select Document tab

8.2 Select the appropriate format to save the file

Note: This creates an Excel file which can be used to merge pricing, availability, technical or any other dealer defined parameters.

8.3 Press the Print button to print report

9. Press Reset button to reset the selector tool for new search

To find the kits available for a specific engine using SISWEB, complete the following steps:

Step 1: In SISWEB, type in the Serial Number Prefix of the engine and select the Systems & Components (Product Structure) Access Method from the Right side menu screen.

Step 2: Select the appropriate configuration for your machine.

Step 3:  Select “BASIC ENGINE”, “ENGINE OVERHAUL KIT” and “Parts Identification”.

Step 4: Select the “KIT – ENGINE OVERHAUL” option which contains the Bronze, Silver, Gold, and Platinum options from which you can select your preferred option or drill down further within the kits to verify consist.

Notes for understanding the SISWEB parts page information

• Non-Serviced part numbers are italicized.
• A part number that is underlined with a Y in the note field indicates there is a separate illustration that provides more of a part number breakdown.
• Indentations in the Parts Name field are also used to distinguish part number consists. For example, in the illustration below, the 135-4928 SHAFT-WATER PUMP contains 386-3813 SFT-WMPM-CLA.
• Precious Metals Overhaul Kits may contain upgraded parts. These upgraded parts may not appear in your particular engine arrangement in TMI or SIS but they have been technically reviewed for compatibility with your application. For assistance with technical questions, call the Reman Technical Hot Line toll free at (888) 88-REMAN or use our e-mail address -- Reman_Help@cat.com.
• For a list of related parts that may be required for the engine rebuild in addition to the Kit consist, please visit the Related Parts Link: https://dealer.cat.com/related

Core Acceptance

CMIS2 supports an option for US dealers to process cores at either the kit or the Reman component level. US dealers will have to establish their preference and then CMIS2 will generate either individual component entitlements or a kit entitlement that the cores will be processed against. Within one dealership, all kits must be processed the same way.

For US dealers who select kit level processing, CMIS2 will generate one entitlement at the kit level. In this case SELD0315 Engine Overhaul Kits is the core acceptance criteria to reference.

Dealers outside the US will not have this option due to complexities related to import/export regulations on cores. For those dealers and any US dealers who don’t opt for the kit processing, CMIS2 will continue to generate Reman Core entitlements for the Reman components within the kits. Use the appropriate Core Acceptance Criteria to inspect and return the individual cores. The following Core Acceptance Criteria are available supporting these products. All the latest core acceptance criteria guidelines can be found on the Reman Dealer Extranet at: 

https://catreman.cat.com/cda/layout?m=260724&x=7

SELD0016    Cylinder Packs
SELD0018    Cylinder Heads (Europe, Asia, Africa & the Middle East)
SELD0287    Cylinder Heads (North and South America)
SELD0024    Oil Pumps
SELD0226    Unit Injectors Electronic
SELD0031    Water Pumps

Warranty 

 Please consult the appropriate warranty statement for your area.

Core Management

Please refer to the Cat Core Management Information System (CMIS 2) related to the parts information application that describes all Reman part/Core
Acceptability Family (CAF) and other related information. Also refer to other CMIS 2 inquiry applications such as: Dealer Customer Profile, Inspection
Reason Codes, Inspection Line Inquiry, Dealer Add Charges, Dealer Entitlement Activity, Dealer CCR Inquiry, Dealer CCR Entry, Dealer Shipment Processing, Dealer Process Packaging Grief and Reporting. This information is available to all dealers worldwide that have been converted to CMIS 2.

Please go to the Reman Division’s web site https://catreman.cat.com for the latest policy and procedural updates that are available to all dealers worldwide explaining policy and procedural information such as Policy and Core Management SELD0122, “Core Management Systems and Operations Procedures SELD0040, “Reman Core Return Packaging Instructions And Guidelines SELD0300 and “Shipping Instructions” SELD0039.

If you have any questions regarding Reman Core Management or Core Management Systems (CMIS2), feel free to call your Corinth Dealer Service Representative toll free at (800) 537-2928.

Contact Information

For assistance with technical questions, call the Reman Technical Hot Line toll free at (888) 88-REMAN or use our e-mail address -- Reman_Help@cat.com.

                        Global Dealer Solutions Network
                        Parts Technical Support Team
                        Toll Free - North America:  1-877-228-2420
                        International: +1-309-266-4421
                        Electronic Requests:
Send via Microsoft Customer Relationship Management (MSCRM)
                       For access and tutorial information: https://gdsn.cat.com/mscrm