Valve Covers
Usage:
Remove Valve Covers
1. Disconnect hose from crankcase ventilator valve. Remove bolts (2) and valve cover (1). (This operation for right side only).
2. Remove bolts (2) and valve cover (1). (This operation for left side only).
Install Valve Covers
1. Inspect gasket for the valve cover. Install a new gasket if needed.
2. Put the valve cover in position on the cylinder head.
TIGHTENING SEQUENCE
3. Install the bolts that hold the valve cover in place. Tighten the bolts in sequence shown to a torque of 10 ± 2 lb. ft. (14 ± 3 N·m).
4. Connect the hose to the crankcase ventilator (right side only).
Caterpillar Information System:
3208 TRUCK ENGINE Water Temperature Regulators
3208 TRUCK ENGINE Water Pump
3208 TRUCK ENGINE Connecting Rod Bearings
3208 TRUCK ENGINE Crankshaft Main Bearings
3208 TRUCK ENGINE Oil Pan
3208 TRUCK ENGINE Fuel Filter Base
3208 TRUCK ENGINE Oil Filter Base And Engine Oil Cooler
3208 TRUCK ENGINE Starter
3208 TRUCK ENGINE Exhaust Manifold
3208 TRUCK ENGINE Fuel Injection Pump Housing
3208 TRUCK ENGINE Governor
3208 TRUCK ENGINE Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE Crankcase Ventilator Valve
3208 TRUCK ENGINE Rocker Shafts And Push Rods
3208 TRUCK ENGINE Rocker Shafts
3208 TRUCK ENGINE Fuel Injection Nozzles
3208 TRUCK ENGINE Cylinder Heads
3208 TRUCK ENGINE Valve Lifters
3208 TRUCK ENGINE Pistons
3208 TRUCK ENGINE Crankshaft Pulley
3208 TRUCK ENGINE Crankshaft Front Seal
3208 TRUCK ENGINE Timing Gear Cover And Oil Pump
3208 TRUCK ENGINE Oil Pump And Relief Valve
3208 TRUCK ENGINE Camshaft And Gears