Cylinder Liner
Usage:
For installation:
a. Put liquid soap on grooves and seals on lower part of liner.
b. Put a 9L5854 Filler Band completely in SAE30 oil for a moment.
c. Install the band (3) around the groove under the liner flange, without delay.
d. Install the liner in the cylinder block immediately, before expansion of the band.
(1) Bore in liner (new) ... 5.401 ± .001 in.(137.19 ± 0.03 mm)
"Use again" maximum bore (when measured near upper end of the wear surface of the cylinder liner) ... 5.405 in.(137.29 mm)
(2) Thickness of flange on liner ... .5260 ± .0008 in.(13.360 ± 0.020 mm)
(3) Filler Band.
Caterpillar Information System:
1693 DIESEL TRUCK ENGINE Cylinder Block
1693 DIESEL TRUCK ENGINE V-Belt Tension Chart
1693 DIESEL TRUCK ENGINE Fan Drive
1693 DIESEL TRUCK ENGINE Water Temperature Regulators
1693 DIESEL TRUCK ENGINE Water Pump
1693 DIESEL TRUCK ENGINE Lubrication Valve
1693 DIESEL TRUCK ENGINE Oil Pump (9L2283)
1693 DIESEL TRUCK ENGINE Oil Filter Base
1693 DIESEL TRUCK ENGINE Oil Filter
1693 DIESEL TRUCK ENGINE Exhaust Manifold
1693 DIESEL TRUCK ENGINE Cylinder Head
1693 DIESEL TRUCK ENGINE Turbocharger
1693 DIESEL TRUCK ENGINE Cylinder Liner Projection
1693 DIESEL TRUCK ENGINE Piston And Rings
1693 DIESEL TRUCK ENGINE Connecting Rod
1693 DIESEL TRUCK ENGINE Crankshaft
1693 DIESEL TRUCK ENGINE Bearing Surface (Journal)
1693 DIESEL TRUCK ENGINE Connecting Rod Bearings
1693 DIESEL TRUCK ENGINE Main Bearings
1693 DIESEL TRUCK ENGINE Vibration Damper
1693 DIESEL TRUCK ENGINE Air Compressor
1693 DIESEL TRUCK ENGINE Stator For Brakesaver
1693 DIESEL TRUCK ENGINE Flywheel And Timing Gear Housing
1693 DIESEL TRUCK ENGINE Flywheel Runout