Turbocharger Impeller Installation (AiResearch Only)
Usage:
TEST FOR TYPE OF IMPELLER INSTALLATION
1. Install the proper thrust collar and seal carrier spacer on the shaft-wheel assembly to be used.
2. Install impeller on shaft by hand.
3. Measure the distance between impeller and seal carrier at the point where impeller no longer moves freely on shaft.
4. If the distance is:
(a) more than .31 in., use heat for installation. *
(b) .31 in. or less, use room temperature installation. **
Caterpillar Information System:
1693 DIESEL TRUCK ENGINE Camshaft
1693 DIESEL TRUCK ENGINE Camshaft Drive And Idler Gears
1693 DIESEL TRUCK ENGINE Camshaft And Follower
1693 DIESEL TRUCK ENGINE Valves
1693 DIESEL TRUCK ENGINE Accessory Drive
1693 DIESEL TRUCK ENGINE Glow Plug Position
1693 DIESEL TRUCK ENGINE Variable Drive For The Fuel Injection Pump Camshaft
1693 DIESEL TRUCK ENGINE Fuel Filter (Bypass Valve)
1693 DIESEL TRUCK ENGINE Primary Fuel Filter
1693 DIESEL TRUCK ENGINE Hydraulic Air-Fuel Ratio Control
1693 DIESEL TRUCK ENGINE Fuel Transfer Pump
1693 DIESEL TRUCK ENGINE Governor
1693 DIESEL TRUCK ENGINE Turbocharger
1693 DIESEL TRUCK ENGINE Cylinder Head
1693 DIESEL TRUCK ENGINE Exhaust Manifold
1693 DIESEL TRUCK ENGINE Oil Filter
1693 DIESEL TRUCK ENGINE Oil Filter Base
1693 DIESEL TRUCK ENGINE Oil Pump (9L2283)
1693 DIESEL TRUCK ENGINE Lubrication Valve
1693 DIESEL TRUCK ENGINE Water Pump
1693 DIESEL TRUCK ENGINE Water Temperature Regulators
1693 DIESEL TRUCK ENGINE Fan Drive
1693 DIESEL TRUCK ENGINE V-Belt Tension Chart
1693 DIESEL TRUCK ENGINE Cylinder Block