Pulley And Damper
Usage:
Install the damper assembly on the crankshaft until the hub of the damper assembly comes in contact with the gear on the crankshaft. DO NOT use the bolt and washer that holds the damper assembly on the crankshaft to install the damper assembly.
(1) Torque for bolt that holds the pulley ... 624 ± 80 N·m (460 ± 60 lb ft)
When a front power takeoff is used, increase torque for bolt to ... 950 ± 50 N·m (700 ± 37 lb ft)
(2) Distance from end of damper assembly to edge of dust shield ... 31.8 ± 1.5 mm (1.25 ± .06 in)
(3) When front power takeoff is used, tighten bolts to ... 55 ± 7 N·m (40 ± 5 lb ft)
Caterpillar Information System:
3208 INDUSTRIAL & MARINE ENGINES Flywheel Housing Bore
3208 INDUSTRIAL & MARINE ENGINES Flywheel Housing Runout Face Runout (Axial Eccentricity) Of The Flywheel Housing:
3208 INDUSTRIAL & MARINE ENGINES Flywheel Runout
3208 INDUSTRIAL & MARINE ENGINES Bearings For Connecting Rods And Mains
3208 INDUSTRIAL & MARINE ENGINES Crankshaft
3208 INDUSTRIAL & MARINE ENGINES Crankshaft Seals
3208 INDUSTRIAL & MARINE ENGINES Pistons And Rings
3208 INDUSTRIAL & MARINE ENGINES Connecting Rod
3208 INDUSTRIAL & MARINE ENGINES Cylinder Block
3208 INDUSTRIAL & MARINE ENGINES Belt Tension Chart
3208 INDUSTRIAL & MARINE ENGINES Water Temperature Regulator
3208 INDUSTRIAL & MARINE ENGINES Water Pump
3208 INDUSTRIAL & MARINE ENGINES Flywheel
3208 INDUSTRIAL & MARINE ENGINES Alternators And Regulators
3208 INDUSTRIAL & MARINE ENGINES Regulator
3208 INDUSTRIAL & MARINE ENGINES Electric Starter Motor
3208 INDUSTRIAL & MARINE ENGINES Shutoff Solenoids
3208 INDUSTRIAL & MARINE ENGINES Systems Operation
3208 INDUSTRIAL & MARINE ENGINES Testing & Adjusting
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR Introduction
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR Primary Fuel Filter
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR Fuel Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR Oil Pan Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR Oil Pressure Switch