A NEW FLYWHEEL NEEDS TO BE INSTALLED ON CERTAIN G3304 AND G3306 GAS ENGINES Caterpillar


A NEW FLYWHEEL NEEDS TO BE INSTALLED ON CERTAIN G3304 AND G3306 GAS ENGINES

Usage:

Caterpillar: Confidential Yellow
A NEW FLYWHEEL NEEDS TO BE INSTALLED ON CERTAIN G3304 AND G3306 GAS ENGINES

SEBE7488

December 10, 2000
U-323
A-233
O-265

Priority

A NEW FLYWHEEL NEEDS TO BE INSTALLED ON CERTAIN G3304 AND G3306 GAS ENGINES

1156

PI30068

NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI30068" as the Part number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI30068" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

COMPLETION DATE

TERMINATION DATE

June 30, 2001

December 31, 2001

PROBLEM

A new flywheel needs to be installed on certain G3304 and G3306 Gas Engines. The ignition timing marks stamped on the circumference of the flywheel may have been indexed incorrectly and the ignition time may not be set properly.

AFFECTED PRODUCT

G3306 07Y7746-7748, 7750, 7751, 7754, 7756-7759, 7761-7764, 7766-7768, 7770, 7772, 7774, 7776

G3304 37Y3976, 3977, 3980-3985, 3987-3989, 3991, 3993, 3995-3997, 4000-4002

PARTS NEEDED

1 - 4W6805 Flywheel Assembly

ACTION REQUIRED

Check to see if the timing marks are in the correct location by pinning the flywheel and removing the large pipe plug on the left side of the flywheel housing. If the timing mark is setting on 0 (zero) +/- 2 degrees, the flywheel is okay. If the number of degrees is larger than +/- 2 degrees the flywheel will need to be replaced.

OWNER NOTIFICATION

U.S. and Canadian owners will receive the attached Owner Notification.

SERVICE CLAIM ALLOWANCES

Caterpillar

Dealer Suggested

Customer Suggested

Parts

Labor Hrs.

Parts

Labor Hrs.

Parts

Labor Hrs.

100%

1

0

0

0

0

NOTE: This is a 1-hour job.

NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report

PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

 

MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.

 

Attach. (1-Owner Notification)

COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS

XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999

PRIORITY - A New Flywheel Needs To Be Installed

MODELS INVOLVED - G3304 and G3306 Gas Engines

Dear Caterpillar Product Owner:

A new flywheel needs to be installed on certain G3304 and G3306 Gas Engines. The ignition timing marks stamped on the circumference of the flywheel may have been indexed incorrectly and the ignition time may not be set properly. New flywheel assemblies need to be installed on the products listed below.

Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated December 10, 2000 when scheduling this service. You will not be charged for the service performed.

We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.

Caterpillar Inc.

Identification #(s)

Attached to December 10, 2000 Service Letter

Caterpillar Information System:

PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER BALANCE TUBE O-RING SEALS ON CERTAIN 789C AND 793C OFF HIGHWAY TRUCKS AND ON CERTAIN 3516B ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER BALANCE TUBE O-RING SEALS ON CERTAIN 789C AND 793C OFF HIGHWAY TRUCKS AND ON CERTAIN 3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3508B AND 3516B GEN SET ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3508B AND 3516B GEN SET ENGINES
REMOVE CERTAIN 1712448 SOLENOIDS FROM PARTS STOCK REMOVE CERTAIN 1712448 SOLENOIDS FROM PARTS STOCK
THE ENGINE WATER PUMPS NEED TO BE INSPECTED ON CERTAIN D11R TRACTORS; 776D TRACTORS; 777D AND 793C TRUCKS; 992G WHEEL LOADERS; 3508, 3508B, G3508, 3512, 3512B, G3512, 3516, 3516B, G3516, G3524, AND G3532 ENGINES THE ENGINE WATER PUMPS NEED TO BE INSPECTED ON CERTAIN D11R TRACTORS; 776D TRACTORS; 777D AND 793C TRUCKS; 992G WHEEL LOADERS; 3508, 3508B, G3508, 3512, 3512B, G3512, 3516, 3516B, G3516, G3524, AND G3532 ENGINES
THE SPIN ON FUEL FILTER BASE ON CERTAIN 3508, 3508B, 3512, 3512B, 3516, 3516B DIESEL STANDBY ENGINES NEEDS TO BE INSPECTED THE SPIN ON FUEL FILTER BASE ON CERTAIN 3508, 3508B, 3512, 3512B, 3516, 3516B DIESEL STANDBY ENGINES NEEDS TO BE INSPECTED
CERTAIN 2P4005 FILTERS NEED TO BE REMOVED FROM PARTS STOCK CERTAIN 2P4005 FILTERS NEED TO BE REMOVED FROM PARTS STOCK
Certain Reman Cylinder And Piston Packs Need To be Removed From Dealer Parts Stock Certain Reman Cylinder And Piston Packs Need To be Removed From Dealer Parts Stock
Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines Product Support Program For Installing A Wastegate Cover Kit On Certain 3406E, C-15, C-16, And C-12 Engines
Certain 1123930 And 1475112 Bolts Parts Need To Be Returned To Grimbergen Certain 1123930 And 1475112 Bolts Parts Need To Be Returned To Grimbergen
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER MOUNTING STUDS THAT MAY FAIL ON CERTAIN 3176C AND 3196 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER MOUNTING STUDS THAT MAY FAIL ON CERTAIN 3176C AND 3196 ENGINES
The Fan Guard Mounting Washers Need To Be Replaced On Certain 3412C Gensets The Fan Guard Mounting Washers Need To Be Replaced On Certain 3412C Gensets
Product Support Program For Replacing The Bolts Between The Exhaust Bellows And The Turbo Outlet On Certain 3508b And 3512b Engines Product Support Program For Replacing The Bolts Between The Exhaust Bellows And The Turbo Outlet On Certain 3508b And 3512b Engines
CERTAIN 0R3043 REMANUFACTURED CYLINDER PACKS FOR USE IN THE 3300 FAMILY OF ENGINES NEED TO BE REMOVED FROM DEALER PARTS STOCK CERTAIN 0R3043 REMANUFACTURED CYLINDER PACKS FOR USE IN THE 3300 FAMILY OF ENGINES NEED TO BE REMOVED FROM DEALER PARTS STOCK
A RADIATOR BAFFLE COMPONENT NEEDS TO BE INSTALLED ON CERTAIN 3516B ENGINES A RADIATOR BAFFLE COMPONENT NEEDS TO BE INSTALLED ON CERTAIN 3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING RADIATOR MOUNTING HOLE THICKNESS ON CERTAIN 3412 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR CHECKING RADIATOR MOUNTING HOLE THICKNESS ON CERTAIN 3412 GENERATOR SETS
CERTAIN 1R0755 HIGH EFFICIENCY FUEL FILTERS NEED TO BE REMOVED FROM PARTS STOCK CERTAIN 1R0755 HIGH EFFICIENCY FUEL FILTERS NEED TO BE REMOVED FROM PARTS STOCK
Product Support Program For Reworking Cylinder Block Bore That Have Excessive Wear And/Or Cracks On Certain 3126 Marine Engines Product Support Program For Reworking Cylinder Block Bore That Have Excessive Wear And/Or Cracks On Certain 3126 Marine Engines
CERTAIN SMR SEALS NEED TO BE REMOVED FROM PARTS STOCK CERTAIN SMR SEALS NEED TO BE REMOVED FROM PARTS STOCK
CERTAIN 8X2291 HOUSINGS NEED TO BE REMOVED FROM DEALER PARTS STOCK CERTAIN 8X2291 HOUSINGS NEED TO BE REMOVED FROM DEALER PARTS STOCK
ENGINE EMISSION LABELS AND AN OWNER NOTIFICATION LETTER TO BE PROVIDED TO OWNERS OF GENERATOR SETS WITH 3406C ENGINES PRODUCED IN 1996, 1997, 1998, AND 1999 ENGINE EMISSION LABELS AND AN OWNER NOTIFICATION LETTER TO BE PROVIDED TO OWNERS OF GENERATOR SETS WITH 3406C ENGINES PRODUCED IN 1996, 1997, 1998, AND 1999
PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS; PRODUCT SUPPORT PROGRAM TO REPLACE DEALER INSTALLED ROD BEARINGS ON CERTAIN 3400, 3300, 3176, AND C-10 ENGINES, IN ALL APPLICATIONS; COMPACTORS; MOTOR GRADERS; OFF-HIGHWAY TRUCKS; ARTICULATED TRUCKS; TRACK-TYPE TRACTORS; TRACK LOADERS; WHEEL LOADERS;
THE RADIATOR FAN MOTOR CIRCUIT BREAKER NEEDS REPLACED ON CERTAIN 3516B ENGINES THE RADIATOR FAN MOTOR CIRCUIT BREAKER NEEDS REPLACED ON CERTAIN 3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL INJECTORS ONLY AFTER AN INJECTOR TIP FAILURE IN CERTAIN C-10, C-12, C-15, C-16, AND 3406E TRUCK ENGINES
THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES THE INJECTOR PUSHROD NEEDS TO BE CHECKED AND REPLACED IN CERTAIN C-10, C-12, 3176C AND 3196 ENGINES
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.