1979/01/24 Caterpillar


Current Chart For Dynamometer Adapters

Usage:


All Engines

A new chart that shows all the dynamometer adapters for current engines is in a new Tool Announcement SENS6301. The Tool Announcement has been sent to all personnel who have the Tool Guide.

Three adapters have been changed so they will fit both the current models and the earlier models that use these adapters. These adapters are:

The new FT drawings are available from your Division Service Manager.

Caterpillar Information System:

1979/01/24 Ether Starting Aid Groups Are Now Available
1979/01/24 A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/10 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group
1979/01/10 New 6V87 Gauge Measures Valve Stem Wear
1979/01/10 Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed
1994/07/08 Improved Lubrication Of Attachment Coupler Bushing{5133}
1994/07/08 Extended Shuttle Valve Holder{4289}
1994/07/08 Transmission Drive Shaft Group Replacement{3253}
1994/07/08 Improved Transmission Oil Filler Tube Mounting{3014}
1994/07/08 New Retrofit Kit Available For Brake Pipe Arrangement{4257}
1994/07/08 Improved Master Cylinder Available{4258,4259,5470}
1994/07/08 Brake System Servicing{4005}
1979/01/24 5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods
1979/01/24 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter
1979/01/24 List Of Service Publications
1979/03/07 Federal Law Prohibits Tampering With Noise Control Systems
1979/03/07 Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group
1979/03/07 New Larger Capacity Water Separator Is Available
1979/03/07 High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage
1979/03/07 New Manifold Assembly Gives More Room For The Lifting Eye
1979/03/07 Engine Valve Springs Are Now Made Of Carbon Steel Alloy
1979/03/07 New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07 Use SIRS To Keep Service Literature Current
1979/03/07 Retroreflective Tape Makes Phototach Kit Easier To Read
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.