Pressure Sensor (ARD Combustion Air) - Remove and Install
- Remove plate (1).
Show/hide table
Illustration 1 | g06339329 |
- Disconnect harness assembly (2) and remove pressure sensor (3) and the O-ring seal.
Show/hide table
Illustration 2 | g06411905 |
- Install pressure sensor (3) in the reverse order of removal.
- Tighten pressure sensor (3) to a torque of
10 ± 2 N·m (89 ± 17 lb in) .
Note: Do not pre-tighten the pressure sensor using the plastic portion of the sensor. Pre-tighten the pressure sensor using the metal hex portion of the sensor. Damage can occur to the pressure sensor if pre-tightened using the plastic portion of the pressure sensor.
- Tighten pressure sensor (3) to a torque of
Caterpillar Information System:
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Assemble
140 Motor Grader Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Disassemble
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405} Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405}
320 GC, 320 and 323 Excavator Machine Systems Specifications Front Lines
140 Motor Grader Engine Supplement Engine Support (Front) - Remove and Install
140 Motor Graders Transmission Filter and Mounting
C15 and C18 Engines for Caterpillar Built Machines Air Compressor Drive Gear - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Air Compressor - Remove and Install - If Equipped
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Hydraulic Lockout Control - Remove and Install
140 Motor Graders Tandem and Cover
140 Motor Grader Engine Supplement Nozzle Heater Harness - Remove and Install
120 Motor Graders Wheel Lean Cylinder and Mounting
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
140 Motor Graders Window Wipers
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder Lines
120 Motor Graders Articulation Cylinder
C175 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Rear) - Remove
140 Motor Grader Machine Systems Fuel Tank - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavator System Schematic
New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620} New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620}