Engine - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 189-0408 | Shackle As | 2 |
Start By:
- Remove the cab
- Remove the counterweight
- Remove the hydraulic tank
- Remove the main hydraulic pump
- Remove the cooling package
- Remove clamp (1).
- Remove bolts (3) and pipe (2).
Show/hide table
Illustration 3 g06321110 - Disconnect straps (4). Remove muffler (5).
Show/hide table
Illustration 4 g06321123 Show/hide tableIllustration 5 g06321134 - Remove hose (6) and air box (7).
Show/hide table
Illustration 6 g06321152 - Disconnect fittings (8).
Show/hide table
Illustration 7 g06321156 Show/hide tableIllustration 8 g06321162 - Disconnect cable assembly (9) from the injector pump.
Cut cable strap (10). Remove bracket (11) from the engine.
Show/hide tableIllustration 9 g06321219 - Disconnect ground strap (12).
Show/hide table
Illustration 10 g06321255 - Disconnect harness assembly (13) from the alternator and starter.
Show/hide table
Illustration 11 g06321260 - Remove cable ties (14) to remove harness assembly (13).
Show/hide table
Illustration 12 g06321261 - Disconnect harness assembly (15), remove cable ties (16), and disconnect harness assembly (17).
Show/hide table
Illustration 13 g06321543 - Disconnect harness assemblies (18). Remove harness assembly (13).
Show/hide table
Illustration 14 g06321595 Show/hide tableIllustration 15 g06321607 - Disconnect hoses (19) and (20).
Show/hide table
Illustration 16 g06321622 - Remove bolts (21) and the mounting pads.
Show/hide table
Illustration 17 g06321639 - Attach a suitable lifting device to Tooling (A). The weight of engine (22) is approximately
129 kg (285 lb) . Remove engine (22).
Show/hide table
Illustration 1 | g06320907 |
Show/hide table
Illustration 2 | g06321105 |
- Install engine in the reverse order of removal.
Show/hide table
Illustration 18 g06321152 - Tighten bolts on fittings (8) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
Caterpillar Information System:
C175-16 Petroleum Engine Sensor Signal (Analog, Active) - Test
C175-16 Petroleum Engine Injector Solenoid - Test
Rework Procedure for Power Cables on Certain C27 and C32 Generator Sets {4459} Rework Procedure for Power Cables on Certain C27 and C32 Generator Sets {4459}
C175-16 Petroleum Engine Fuel Priming Pump - Test
G3500H Generator Set Engine Crankcase Pressure Is Low
320D3 Hydraulic Excavator Engine Supplements Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Assemble
320D3 Hydraulic Excavator Engine Supplements Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Remove and Install
Updated Oil Pan Group is Now Used on Certain 3512C Locomotive Engines {1302} Updated Oil Pan Group is Now Used on Certain 3512C Locomotive Engines {1302}
3500 Engines Engine Coolant Temperature Sensor
Improved Operating Information for the Engine Hood for Certain 320 GC, 320 and 323 Excavators {7251, 7276} Improved Operating Information for the Engine Hood for Certain 320 GC, 320 and 323 Excavators {7251, 7276}
3500 Engines Stub Shaft (Front)
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070} Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankcase Breather - Remove
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankcase Breather - Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel - Remove
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel - Install
320D3 and 323D3 Excavators Machine System Specifications Bucket Linkage - B1 Family
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
3500C IMO III Engines Solenoid Valve - Test - Engine
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Disassemble
320D3 Excavators Cooling System Coolant (ELC) - Change
320D3 Excavators Engine Oil Sample - Obtain
3516C IMO III Petroleum Engines Air Starting Motor - Remove
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install