Control Panel - Inspect/Test
检查仪表板的情况。 如果部件损坏，确保部件得到维修或更换。 确保电子显示装置(如有配备)工作正常。 检查导线状况是否良好。 确保导线连接牢固可靠。
执行以下步骤以测试 EMCP 4 控制面板上的灯：
- 按下 Main Menu（主菜单）按钮
- 滚动，选择 Preferences（首选项）
- 按下 OK（确定）按钮。
- 滚动，选择 Lamp Test（灯测试）
- 按下 OK（确定）按钮。
面板照明灯 开关应打开面板照明灯。 扳动该开关，以确保面板照明灯工作。
Show/hide table
| |
| 图 1 | g01101388 |
无论数据链路是否连接了，都要对发光二极管（LED）指示灯和警报器进行测试。 灯测试 开关位于靠近报警器上端的地方。 通过按住灯测试按钮来测试警报器和指示灯。 应在起动发动机前更换所有出故障的部件。
Caterpillar Information System:
C27 and C32 Generator Set Starting the Engine
C27 and C32 Generator Set Cold Weather Starting
C27 and C32 Generator Set Configuration Parameters
C27 and C32 Generator Set Product Description
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuel Tank Water and Sediment - Drain
C27 and C32 Generator Set Maintenance Interval Schedule - Prime
C27 and C32 Generator Set Maintenance Interval Schedule - Standby
794 AC Off-Highway Truck Leaving the Machine
C11 and C13 Industrial Engines Maintenance Interval Schedule - Engines Which Have Shallow Oil Pans
Installing the New NOx Reduction System Pressure Sensor Kit on Certain C7.1 Engines {1718, 1917, 1923, 1924, 7400} Installing the New NOx Reduction System Pressure Sensor Kit on Certain C7.1 Engines {1718, 1917, 1923, 1924, 7400}
New NOx Reduction System (NRS) Differential Pressure Sensor Kit on Certain C7.1 Engines {1718, 1917, 1923, 1924, 7400} New NOx Reduction System (NRS) Differential Pressure Sensor Kit on Certain C7.1 Engines {1718, 1917, 1923, 1924, 7400}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuel System Water Separator - Drain
C27 and C32 Generator Set Model View Illustrations
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Fuses - Replace
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Oil Pan - Remove and Install
C7.1 Marine Propulsion Engine Rocker Arm and Shaft - Remove
C7.1 Marine Propulsion Engine Rocker Arm - Disassemble
C7.1 Marine Propulsion Engine Rocker Arm - Assemble
C7.1 Marine Propulsion Engine Rocker Arm and Shaft - Install
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
336, 336 GC and 340 Excavator Systems Diagnostic Trouble Codes
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057} The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
The Jacket Water Heater May Fail on Certain 3512C HD and 3516C HD Marine Engines {1383} The Jacket Water Heater May Fail on Certain 3512C HD and 3516C HD Marine Engines {1383}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Hydraulic System Oil - Change