Reference Information
Note: Information for the following items may be needed for ordering parts. Locate the information for your engine. Record the information in the appropriate space. Make a copy of this list for your records and retain the information for future reference.
Show/hide table
| System or Component | Information |
|---|---|
| Chassis serial number | |
| Engine model | |
| Engine serial number | |
| Engine arrangement number | |
| Modification number | |
| Engine low idle rpm | |
| Engine full load rpm | |
| Performance specification number | |
| Engine horsepower | |
| Primary fuel filter part number | |
| Water separator element part number | |
| Secondary fuel filter element part number | |
| Lubrication oil filter element part number | |
| Auxiliary oil filter element part number | |
| Supplemental coolant additive maintenance element part number (if equipped) | |
| Total lubrication system capacity | |
| Total cooling system capacity | |
| Engine air cleaner element part number (outer element) | |
| Engine air cleaner element part number (inner element) | |
| Fan drive belt part number | |
| Alternator belt part number |
Caterpillar Information System:
DE Series Generator Sets With Cat C3.3 Engine Maintenance Interval Schedule - Standby
DE Series Generator Sets With Cat C3.3 Engine Maintenance Interval Schedule - Prime Power
C13 Engines Emissions Certification Film
C13 Engines Plate Locations and Film Locations
G3516 TA Engine ECM - Replace
3512E Tier 4 Final Engines for Land Electric Drilling Injector Solenoid - Test
C3.4B Engines for Caterpillar Built Machines Aftertreatment SCR System Dosing - Test
C3.4B Engines for Caterpillar Built Machines Diesel Exhaust Fluid Tank - Flush
C18 Generator Set Engine Protective Devices - Check
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Filter Screen (DEF) - Inspect/Clean
DE Series Generator Set With Cat C4.4 Engine Control Panel
G3612 and G3616 Engines Control Box - Remove and Install
C13 Engines Monitoring System
2015/03/02 New Phone Number for VIMS Support Is Now Available for All Cat® Products Equipped with VIMS {7601}
G3600 A4 Engines Electronic Service Tools
G3612 and G3616 Engines Prelubrication Oil Pump - Remove and Install
Aftertreatment Filter Maintenance on Large Engine Tier 4 Interim and Final Products Equipped with a Selective Catalyst Reduction (SCR) Filter{1075, 108H, 1920} Aftertreatment Filter Maintenance on Large Engine Tier 4 Interim and Final Products Equipped with a Selective Catalyst Reduction (SCR) Filter{1075, 108H, 1920}
C9.3 Marine Auxiliary and Generator Set Engine Crankcase Pressure Is High
C13 Engines Diagnostic Flash Code Retrieval
C13 Engines Diagnostic Lamp
C27 Industrial Engine and C27 Locomotive Engine Maintenance Interval Schedule
G3600 A4 Engines Lubrication System
G3612 and G3616 Engines Engine Oil Pump - Remove and Install
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Refill Capacities and Recommendations