Actuator (Hydrax) - Remove and Install
- 拆卸螺栓 (1) 和护板 (2)。
Show/hide table
图 2 g03797017 - 拆下弯头 (3)、弯头 (5) 和线束组件 (4)。
Show/hide table
图 3 g03797022 - 拆下螺栓 (8)、螺母 (7) 和电动执行器 (6)。
Show/hide table
图 1 | g03796749 |
- 按与拆卸相反的顺序安装电动执行器 (6)。
- 将螺栓 (8) 拧紧至扭矩为
47 ± 9 N·m (35 ± 7 lb ft) 。 - 拧紧螺母 (7) 至扭矩
200 ± 20 N·m (148 ± 15 lb ft) - 拧紧螺栓 (1) 至扭矩为
47 ± 9 N·m (35 ± 7 lb ft) 。
- 将螺栓 (8) 拧紧至扭矩为
Caterpillar Information System:
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Coolant Sample (Level 2) - Obtain
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Coolant Sample (Level 1) - Obtain
3516C Marine Engines Gear Group (Rear) - Remove and Install
G3612 and G3616 Engines Air Valve - Remove and Install
3516C Marine Engines Maintenance Interval Schedule
C7.1 Engines Switch Circuits - Test - Air Filter Restriction Switch
C8.7 Marine Engine Supercharger - Remove and Install
C4.4 and C7.1 Engines Switch Circuits - Test - Multiposition Throttle Switch
C2.2 Engines for Caterpillar Built Machines Housing (Front) - Install
C2.2 Engines for Caterpillar Built Machines Compression - Test
C4.4 Engines Speed/Timing - Test
C7.1 Engines Speed Control (PWM) - Test
794 AC Off-Highway Truck Power Train Coupler Adapter and Mounting - Remove and Install
3516C Marine Engines Rocker Shaft and Push Rod - Remove and Install
C9.3 Marine Auxiliary and Generator Set Engine General Information
C9.3 Marine Auxiliary and Generator Set Engine Welding Precaution
C8.7 and C12.9 Marine Engines Electrical Power Supply - Test
C9.3 Marine Auxiliary and Generator Set Engine Electronic Service Tools
G3612 and G3616 Engines Air Inlet Choke - Remove and Install
794 AC Off-Highway Truck Engine Supplement Engine Trunnion - Remove and Install
C8.7 and C12.9 Marine Engines Sensor Signal (Analog, Passive) - Test
C9.3 Marine Auxiliary and Generator Set Engine System Overview
C18 Generator Set Safety Messages
C7.1 Engines Valve Position - Test