Air Lines
Show/hide table
Illustration 1 | g03658743 |
Show/hide table
Specification for 422-3828 Air Lines Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 6V-5103 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
2 | 2 | 422-8011 Bellows As | Ensure that bellows are installed for proper flow direction as indicated on bellows by arrows. |
3 | 4 | 434-6544 V Band Clamp | Before assembly, lubricate threads, bearing surfaces and inside diameter of clamps with Never-Seez Marine Grade.
Torque to |
4 | 2 | 6V-3968 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
5 | 9 | 6V-5101 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
Show/hide table
Illustration 2 | g00593641 |
Bolt tightening sequence |
Show/hide table
Item | Qty | Part | Specification description |
6 | 12 | 8J-5985 Bolt | Use the following procedure in order to assemble the aftercooler assembly and tighten the bolts: 1. Assemble the seals to the aftercooler core. 2. Temporarily secure the bottom seal to the aftercooler with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal. 3. Assemble the aftercooler with seals to the inlet manifold. 4. Inspect the bottom seal in order to ensure that the seal is seating correctly in the recess. 5. Install the aftercooler cover. 6. Inspect the upper seal in order to ensure that the seal is seating correctly in the recess. 7. Install the cover bolts. Hand tighten the cover bolts. 8. Tighten the bolts in a numerical sequence as shown in Illustration 2 to 9. Again, tighten the bolts in a numerical sequence that is shown in Illustration 2 to 10. Remove the tape. |
Caterpillar Information System:
3512C HD and 3516C HD IPP Rental Power Modules Injector Solenoid - Test
3500B Engines for Caterpillar Built Power Modules Air Lines
3500B Engines for Caterpillar Built Power Modules Turbocharger
3500B Engines for Caterpillar Built Power Modules Turbocharger
3500B Engines for Caterpillar Built Power Modules Turbocharger Oil Lines
3512C HD and 3516C HD IPP Rental Power Modules Diagnostic Trouble Codes
3512C HD and 3516C HD IPP Rental Power Modules Starting - Test
C8.7 Marine Engines Cooling System
Cat® Command For Hauling E1540
Cat® Command For Hauling E1537
Cat® Command For Hauling E1536
Cat® Command For Hauling E1510
Cat® Command For Hauling MID 039 - CID 0084 - FMI 02
XQC1200 and XQC1600 Power Modules Radiator - Remove and Install
Cat® Command For Hauling E1976
Cat® Command For Hauling E2074
Cat® Command For Hauling E2126
Cat® Command For Hauling E2139
Cat® Command For Hauling E10012
Cat® Command For Hauling E10013
Cat® Command For Hauling E10014
Cat® Command For Hauling E10015
Cat® Command For Hauling E10016
2014/04/11 New Software Is Used on Certain G3516B Petroleum Engines {1901, 1920}