C15 and C18 Industrial Engines Caterpillar


Air Inlet Elbow - Remove and Install

Usage:

C15 N5F

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
LOCTITE
592 螺纹密封胶 
--  LOCTITE
540 螺塞密封胶 


    图 1g03398579

  1. 从温度传感器 (5) 上断开线束组件。 拆下温度传感器 (5)。

  2. 拆下支架 (3)。 松开卡箍 (1) 和 (6)。

  3. 拆下螺栓 (2),然后拆下进气弯头 (4)。


    图 2g03398589

  4. 拆下螺栓 (8) 和管 (7)。


    图 3g03398590

  5. 拆下定位销 (9) 和 O 形密封圈 (10)。 拆下管子 (11)。


    图 4g03398591

  6. 拆下杯塞 (12) 和管塞 (13)。

安装步骤

  1. 按与拆卸相反的顺序安装进气弯头 (4)。

    1. 将工具 (A) 涂抹到管塞 (13) 的螺纹上。

    2. 将工具 (B) 涂覆到杯塞 (13) 上。

    3. 将卡箍 (6) 拧紧至扭矩为 8.5 ± 1 N·m (75 ± 9 lb in)

    4. 将温度传感器 (5) 拧紧至扭矩为 20 ± 5 N·m (177 ± 44 lb in)

Caterpillar Information System:

C15 and C18 Industrial Engines Exhaust Elbow - Remove and Install
3500B Locomotive Engines Belts - Inspect/Adjust/Replace
3516C Petroleum Engines Engine Oil Filter Housing - Disassemble
G3500B Engines Engine Shutdown Occurs Intermittently
325D and 329D Excavators Hydraulic System Accumulator (Pilot) - Test and Charge
C175-16 Locomotive Engine Engine Coolant Temperature Sensor
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Disassemble
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Assemble
Troubleshooting Procedure for the Failure of All Refueling Pumps {1295} Troubleshooting Procedure for the Failure of All Refueling Pumps {1295}
C15 and C18 Industrial Engines Air Control Valve - Remove and Install
2014/07/18 A New Auxiliary Water Pump Group is Used in Certain CG137 and G3400 Engines {1371}
C15 and C18 Industrial Engines Exhaust Cooler (NRS) - Remove and Install
C32 Petroleum Engines Product Description
C32 Petroleum Engines Refill Capacities
C32 Petroleum Engines Air Compressor - Check
419-9827 C175 Damper Lifting Device{0374, 0599, 0629, 0632, 0700, 0701, 1205} 419-9827 C175 Damper Lifting Device{0374, 0599, 0629, 0632, 0700, 0701, 1205}
C15 and C18 Industrial Engines Water Pump - Remove and Install
C7.1 Marine Generator Set Control Panel - Customer Connect
Retrofit SCR Aftertreatment Safety Messages
Retrofit SCR Aftertreatment General Hazard Information
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Burn Prevention
Installation and Maintenance of the Fuel System for Certain Gas Engines {1250, 1270, 1274, 5137} Installation and Maintenance of the Fuel System for Certain Gas Engines {1250, 1270, 1274, 5137}
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Fire Prevention and Explosion Prevention
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Mounting and Dismounting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.