Pistons and Connecting Rods - Disassemble
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 6V-6192 | 挡圈钳 | 1 |
| B | 7M-3978 | 活塞环扩张器总成 | 1 |
开始:
- 拆下活塞和连杆。
注: 为每个活塞和连接杆组件的部件做标记。 所有部件必须安装回原来的位置。 请勿交换使用部件。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将连杆轴承 (9) 从连杆轴承盖 (10) 上拆下。 将连杆轴承 (9) 从连杆 (6) 上拆下。
- 使用工具 (A) 将销挡圈 (5) 从活塞体组件 (4) 上拆下。
- 将连杆 (8) 和连杆 (6) 从活塞体组件 (4) 上拆下。
- 使用工具 (B) 将活塞环 (1)、 (2) 和 (3) 从活塞体组件 (4) 上拆下。
- 此时请勿将轴承 (7) 从连杆 (6) 上拆下。
Show/hide table
| |
| 图 1 | g01017728 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Cylinder Liner - Remove and Install
C175 Commercial Engine Intake Valve Recession {1100} C175 Commercial Engine Intake Valve Recession {1100}
2013/08/06 New Software Is Now Used on Certain C18 Auxiliary and Generator Set Engines {1920}
C15 and C18 Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
C18 Generator Set Model View Illustrations
C13 and C15 Generator Sets After Starting Engine
C7.1 Marine Generator Set Welding on Engines with Electronic Controls
C15 and C18 Engines for Caterpillar Built Machines Camshaft - Remove and Install
C7.1 Marine Generator Set System Pressure Release
C15 and C18 Engines for Caterpillar Built Machines Camshaft - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C15 and C18 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Crankshaft - Remove and Install
C7.1 Marine Generator Set Aftercooler Condensate Drain Valve - Inspect/Clean
C15 and C18 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
C7.1 Marine Generator Set Battery or Battery Cable - Disconnect
C15 and C18 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install