Model View Illustrations
Na následujících pohledech jsou zobrazeny typické funkce motoru. Z důvodu individuálních aplikací se může váš motor od ilustrací lišit.
Show/hide table
Ilustrace 1 | g03343017 |
(1) Sekundární palivové filtry
(2) Hadice odvětrání klikové skříně (3) Ventil pro odběr vzorků oleje (4) Elektronický řídicí modul (5) Olejový filtr (6) Měřidlo hladiny oleje (měrka) (7) Vypouštěcí zátka oleje (8) Uzávěr plnicího hrdla oleje |
Poznámka Motor může mít namontován odvzdušňovač vybavený filtrem (30).
Show/hide table
Ilustrace 2 | g03343019 |
(9) Vývod chladicí kapaliny
(10) Vodní čerpadlo (11) Přívod chladicí kapaliny (12) Tlumič vibrací (13) Napínač řemene (14) Řemen (15) Řemenice vloženého kola |
Show/hide table
Ilustrace 3 | g03343041 |
(16) Výfukové sběrné potrubí
(17) Přední závěsné oko (18) Alternátor (19) Kompresor chladiva (20) turbodmychadlo, (21) Startér (22) Elektromagnet startéru (23) Setrvačník (24) Skříň setrvačníku (25) Zadní závěsné oko |
Díly a volitelné vybavení mimo motor
Show/hide table
Ilustrace 4 | g03343046 |
(26) Elektrické plnicí čerpadlo
(27) Primární palivový filtr (28) Mechanické plnicí čerpadlo (29) Primární palivový filtr (30) Našroubované odvětrání klikové skříně |
Caterpillar Information System:
C4.4 Industrial Engine Welding on Engines with Electronic Controls
C4.4 Industrial Engine Engine Electronics
C27 Generator Set Fluid Recommendations
Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714} Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714}
C27 Generator Set Refill Capacities
TA2 Inspection for C32 Marine Propulsion Engines{1000} TA2 Inspection for C32 Marine Propulsion Engines{1000}
2013/03/22 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3512C and 3516C Engines {1379, 7553}
2013/02/18 New Electronic Thermostats Are Used for C175 Engines {135V, 7610}
3516C HD Petroleum Well Service Engines Sensor Signal (Analog, Active) - Test
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Data Link Configuration Status - Test
C7.1 Industrial Engine Electrical System
525D, 535D, 545D, 555D Wheel Skidder High Pressure Fuel Lines
2013/02/06 Always Purge the Air From the Engine Cooling System {1350, 1353}
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Valve
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Pump
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Hydraulic Tank
C7.1 Industrial Engine Product Description
C4.4 and C7.1 Engines Exhaust Has Excessive Black Smoke
C3.8 Engines for Caterpillar Built Machines Turbocharger - Inspect
C8.7 and C12.9 Marine Engines Exhaust Has Excessive White Smoke
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823} Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
C7.1 Marine Engine Camshaft Bearings - Remove and Install
C7.1 Marine Engine Engine Oil Pan Plate - Remove and Install
C7.1 Marine Engine Piston Cooling Jets - Remove and Install