Turbocharger
Show/hide table
Illustration 1 | g03317046 |
Show/hide table
Illustration 2 | g03317058 |
Bolt tightening sequence for 6V-6753 High Temperature Bolt (2) |
Show/hide table
Illustration 3 | g03317059 |
Bolt tightening sequence for 6V-1943 High Temperature Bolt (3) |
Show/hide table
Specification for 379-5317 Turbocharger Gp | |||
Item | Qty | Part | Specification Description |
1 | 16 | 125-5375 Bolt | Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize.
Torque to |
2 | 8 | 6V-6753 High Temperature Bolt | Use the following procedure in order to tighten the bolts for the half flange: 1. Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. 2. Tighten bolts 1 in any sequence to 3. Tighten bolts 2 in any sequence to |
3 | 12 | 6V-1943 High Temperature Bolt | |
4 | 16 | 369-3458 High Temperature Bolt | Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize.
Torque to |
5 | 8 | 300-8579 Bolt | Use the following procedure in order to tighten the turbo-exhaust manifold joint bolt: Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. 1. Align joints in order to get all four nuts started on the bolts. 2. Snug up all the bolts on the joint. 3. First tighten one bolt to 4. Tighten diagonally opposite bolt to 5. Tighten remaining two bolts to 6. Repeat procedure Step 3 to Step 5 in order to verify that all bolts are torqued to |
Caterpillar Information System:
C175-16 Generator Set Engine Generator Coupling
C175-16 IMO III Offshore Engine Thermocouple
3500B and 3500C Marine Engines Turbocharger
C175-16 Locomotive Engine Thermocouple
C175-16 Locomotive Engine Thermostatic Valve
2012/10/26 Coolant Temperature Sensor on Certain C3.4B Engines {1439, 1906}
815K Soil Compactor and 816K Landfill Compactor Systems Disconnect Switch
3500B and 3500C Marine Engines Turbocharger
C175-16 Generator Set Engine Vibration Damper Guard
3500B and 3500C Marine Engines Camshaft
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Install
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
2013/02/06 A New Coolant Elbow Is Used on Certain 3500 Engines {1380, 7553}
3500B and 3500C Marine Engines Turbocharger
C32 Marine Engine Fuel Pressure Is High
3176C and 3196 Marine Engines Plate Locations and Film Locations
3176C and 3196 Marine Engines Product Lifting
C32 Marine Engine Fuel Pressure Is Low
3176C and 3196 Marine Engines Configuration Parameters - Customer Specified Parameters
3176C and 3196 Marine Engines Transmission Operation
C4.4 Industrial Engine Severe Service Application
C32 Marine Engine Fuel Temperature Is High
3176C and 3196 Marine Engines Fluid Recommendations
3176C and 3196 Marine Engines Belts - Inspect/Adjust/Replace