Engine Oil Pump - Disassemble
Start By:
- Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
- Remove bolts (1) and the washers. Remove cover (2).
Show/hide table
Illustration 2 g01199895 - Remove O-ring seal (3) from cover (2).
Show/hide table
Illustration 3 g01199947 - Remove bushings (4) from cover (2).
Show/hide table
Illustration 4 g01199949 - Remove gears (5) and shafts (6) from oil pump housing (7).
Show/hide table
Illustration 5 g01199952 - Remove bushings (8) from oil pump housing (7).
Show/hide table
Illustration 6 g01199954 - Remove O-ring seals (9) and (10).
Show/hide table
Illustration 1 | g01199893 |
Caterpillar Information System:
C175-16 Generator Set Engine Engine Oil Pump - Remove and Install
C32 Marine Engines Bearing Clearance - Check
2012/10/04 New Exhaust Shields and Seals Are Available for Certain On-Highway Truck Engines {1067}
C175-16 Generator Set Engine Engine Oil Cooler - Assemble
C175-16 Generator Set Engine Engine Oil Cooler - Disassemble
Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380} Coolant Line Upgrade for the Exhaust System Components on G3516B Engine.{1050, 1059, 1061, 1380}
C13, C15, and C18 Tier 4 Final Engines DEF Return Valve - Test
2012/10/23 A New Clamp is Now Used for the Air Lines Group on Certain Off-Highway Trucks and Quarry Trucks {1071, 1071}
C175-16 Generator Set Engine Engine Oil Cooler - Remove and Install
Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480} Procedure for Pre-Commissioning the IGBT on Certain UPSB505 Uninterruptible Power Supplies{1418, 4480}
C175-16 Generator Set Engine Auxiliary Water Pump - Assemble
C175-16 Generator Set Engine Auxiliary Water Pump - Disassemble
2012/10/04 A New Unit Injector Wiring Group Is Used on Certain C9.3 Industrial Engines {1290, 1408, 1900}
2012/11/09 A New Canadian Standards Association (CSA) Ignition Harness Is Used by Certain G3406 Engines {1408}
C175-16 Generator Set Engine Engine Oil Pump - Assemble
C175-16 Generator Set Engine Engine Oil Filter Housing - Remove and Install
C175-16 Generator Set Engine Engine Oil and Water Pump Drive - Remove and Install
2012/10/22 A New Coolant Pressure Sensor Is Used on C175-16 Petroleum Engines {1439, 1439, 191W}
C175-16 Generator Set Engine Engine Oil and Water Pump Drive - Disassemble
C32 Marine Engines Heat Exchanger - Remove and Install
G3520E Generator Set Engines Cylinder Block
C1.5 and C2.2 Industrial Engines Customer Specified Parameters Table
2012/10/24 New Exhaust Valves Are Used in G3500 and G3500B Engines {1105}
2012/10/08 Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}