Electronic Control Module (ECM) - Replace
更换 ECM 前,请确保更换是必要的。 ECM 不太可能是诊断代码的原因。 务必检查并确认已向 ECM 供电。 要求 ECM 机器线束接头的 J1-1 与 J1-2 之间有蓄电池电压。
更换 ECM 之前,务必向技术通信员征求 Caterpillar 可能提供的意见。 此咨询可以大大降低维修时间。
注: 新的电子控制模块可能会也可能不会针对特定机器进行过预先编程设定。 未经编程设定的电子控制模块必须使用 Cat® 电子技师 (Cat ET) 维修工具进行编程设定。 请参阅测试和调整, "电子控制模块 (ECM) - 闪存编程"。 要确定 ECM 是否经过编程设定,转至步骤 7。
- 将钥匙起动开关和断路开关转到断开位置。
- 从 ECM 上断开机器线束。
- 拆下 ECM。
- 确保新 ECM 的零件号正确。
- 将机器线束与更换的 ECM 相连。
- 安装更换的ECM。
- 确定更换用 ECM 是否已编程设定。 这可采用两种不同的方式进行。 进行步骤 7.a 或 7.b。
- 进入部件数据显示模式。
如果显示屏显示空白,则 ECM 未经编程设定。 请参阅测试和调整, "电子控制模块 (ECM) - 闪存编程"。
如果显示屏显示预期信息,则 ECM 经过编程设定。 转至步骤 8。
- 将 Cat ET 维修工具连接到机器数据链路维修接头上。 Cat ET 维修工具将会与动力传动系 ECM 通信。
如果 ECM 未经编程设定,则 Cat ET 维修工具将指示该问题。
如果 ECM 已编程设定,则 Cat ET 维修工具可以提供对 ECM 所需区域的访问。
- 进入部件数据显示模式。
- 转至测试和调整。 进行所有标定和调整步骤。
注: 如果忽略了任何标定步骤,则会严重影响性能。 即使更换用 ECM 是从类似机器获得的,也要执行全部标定步骤。
Caterpillar Information System:
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Configure
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Symptom Troubleshooting
2012/07/19 Improved Flame Arrestors Are Used for Certain G3500E Engines {1071, 1092}
CEM Locomotive Aftertreatment Catalyst (DOC) - Replace
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Cat Data Link - Test
G3500 Engines Cylinder Head
C13 Tier 4 Final Engines Solenoid Valve
2012/10/04 A New Rocker Arm Assembly Is Used in Certain C11 and C13 Commercial Engines {1123}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254} Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
UPS 250 and UPS 300 Uninterruptible Power Supplies Using Computer Software
C32 Marine Engines Turbocharger - Inspect
UPS 250 and UPS 300 Uninterruptible Power Supplies Menus
C9.3 Tier 4 Final Engines Fuel Injection Pump
G3500 Engines Cylinder Head
G3500 Engines Cylinder Head
C7.1 Industrial Engine Fuel Filter (In-Line) - Replace
793F Off-Highway Truck Engine Supplement Turbocharger - Remove and Install - High Altitude
C32 Marine Engines Unit Injector Sleeve - Remove
C32 Marine Engines Unit Injector Sleeve - Install
G3500 Engines Cylinder Head
C7.1 Industrial Engine Maintenance Interval Schedule
C9.3 Industrial Engine Turbocharger
C6.6 Industrial Engine Engine Crankcase Breather Element - Replace
C4.4 Industrial Engine Fuel System Primary Filter (Water Separator) Element - Replace