- Electric Power Generation:
- C175-16 GEN SET (S/N: WYB1-UP)
- Generator Set:
- C32 MAR GS ENG (S/N: RNE1-UP; RNX1-UP)
- Marine Engine:
- 3412E MARINE (S/N: 9KS1-UP; 9PW1-UP)
- C32 MARINE (S/N: RNR1-UP; RNY1-UP; RNZ1-UP)
- C32 MARINE GS (S/N: RNF1-UP)
- C32 MARINE (S/N: RNR1-UP; RNY1-UP; RNZ1-UP)
- Excavator:
- 312D (S/N: JBC1-UP; LRK1-UP; DLP1-UP; HCW1-UP)
- 313D (S/N: KXD1-UP; WPK1-UP)
- 315D (S/N: JHA1-UP; CJN1-UP)
- 318D (S/N: ZKJ1-UP)
- 319D (S/N: FMH1-UP; EAW1-UP)
- 320D (S/N: JZA1-UP; MZD1-UP; A6F1-UP; A8F1-UP; BZF1-UP; KGF1-UP; KTF1-UP; MGG1-UP; FAL1-UP; PCM1-UP; KHN1-UP; BZP1-UP; GKS1-UP; BWW1-UP; EAX1-UP; CYZ1-UP; JFZ1-UP)
- 323D (S/N: YSD1-UP; NDE1-UP; NZF1-UP; LFL1-UP; L5Z1-UP)
- 313D (S/N: KXD1-UP; WPK1-UP)
- Load Haul Dump:
- R1700G (S/N: SBR1-UP)
- R2900G (S/N: JLK1-UP)
- Mobile Hydraulic Power Unit:
- 312D MHPU (S/N: M3L1-UP)
- Off-Highway Truck/Tractor:
- 785D (S/N: DMC1-UP; MSY1-UP)
- 789C (S/N: 2BW1-UP)
- 789D (S/N: SPD1-UP; SHH1-UP)
- 793C (S/N: ATY1-UP)
- 793D (S/N: FDB1-UP)
- 793F Series AC (S/N: EMD1-UP)
- 793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
- 795F Series AC (S/N: ERM1-UP)
- 797B (S/N: JSM1-UP)
- 797F (S/N: LAJ1-UP; WSP1-UP)
- 789C (S/N: 2BW1-UP)
- Track-Type Tractor:
- D11T (S/N: AMA1-UP; MDG1-UP; JEL1-UP; JNS1-UP)
- Underground Articulated Truck:
- AD30 (S/N: DXR1-UP)
- AD45B (S/N: CXM1-UP)
- AD55 (S/N: DNW1-UP)
- AD45B (S/N: CXM1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
Some 316-9954 Water Separator and Fuel Filter As and 382-0664 Water Separator and Fuel Filter As have reports of leaks at the drain valve. Some drain valves were manufactured with different tolerances therefore making the tightening torque different. The assembly torque specifications have been updated to accommodate the variability of mating surfaces of the O-ring.
Solution
Check all drain valves and ensure that the valves are hand tight. If a torque wrench is available, tighten the drain valve to a torque of 2.8 to 3.1 N·m (25 to 28 lb in). Do not use any other tools other than a torque wrench to tighten the drain valve. If leaks continue after you have tightened the drain valve, use the replacement parts listed in Table 1.
Illustration 1 | g02964896 |
New Part Number     | Description     |
---|---|
299-1893     | Water Separator and Fuel Filter As     |
316-9954     | Water Separator and Fuel Filter As     |
382-0664     | Water Separator and Fuel Filter As     |