A New Turbocharger Water Line Is Used for Certain 3516B and 3516C Engines {1380}
- Engine:
- 3516B (S/N: 4BW1-UP; S2X1-UP)
- 3516C (S/N: TTH1-UP; TTJ1-UP; JTS1-UP)
Description of Change: The new water line (hose assembly) has a longer fitting than the previously used water line. The longer fitting helps keep the hose from rubbing on the heat shield.
Adaptable To: The new 367-2839 Hose As replaces the previously used 313-6219 Hose As in the engines that are listed above. The previously used 313-6219 Hose As is not canceled.
The new 367-2839 Hose As is adaptable the above engines back to first production.
The new 367-2839 Hose As is effective with the following serial numbers:
- JTS00280
- TTH00379
Caterpillar Information System:
3516C Industrial Engine Product Lifting
3500 Generator Sets Engine Air Precleaner - Check/Clean
3500 Generator Sets Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
3500 Generator Sets Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
2011/10/28 Correct Orientation of the V-Band Clamp on the Center Housing/Turbine Housing Joint Is Needed on Certain C15 Truck Engines {1052, 1053}
C3.4B Engines Diesel Particulate Filter Active Regeneration Was Interrupted
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562} Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Electronic Control Unit - Flash Program
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
320 GC, 320 and 323 Excavator Machine Systems Specifications Refrigerant Compressor
3512C and 3516C Marine Auxiliary and Generator Set Engines Fumes Disposal Filter Element - Replace
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission - Calibrate
2011/12/23 Special Instruction, REHS7409, "Initial Start-Up of CG137 and G3300B Engines" Is Available {1000}
3516C Marine Engine Engine Operation
2011/10/19 Improved Bolts and Washers Along with a New Procedure Are Used to Fasten the Pilot to the Lockup Clutch Housing {3101, 7553}
2011/12/14 A New Engine Oil Cooler Bypass Is Used for C175-16 Engines {1307}
320E and 323E Excavators Machine System Specifications Travel Motor Guard
320E and 323E Excavators Machine System Specifications Swivel
2011/11/11 New Heat Exchanger Groups and Spacers Are Used on Certain C32 Marine Engines {1379}
2011/12/05 New Heat Exchanger Groups and Spacers Are Used on Certain C18 Commercial and Marine Engines {1379}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920} Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
2012/03/13 A New Piston Is Used in Certain C18 Engines {1214, 1225}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
320E and 323E Excavators Machine System Specifications Stick Cylinder