Turbocharger
Show/hide table
| |
| 图 1 | g02608142 |
Show/hide table
| |
| 图 2 | g02608141 |
Show/hide table
| 230-7911 涡轮增压器总成和 233-7492 涡轮增压器总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 9N-2038 涡轮卡箍组件 | 按照以下步骤拧紧涡轮卡箍组件：
1. 拧紧至扭矩为 2. 松开至 3. 再次拧紧至扭矩为 |
| 2 | - | - | 废气旁通阀的开启压力为 |
| 3 | - | 7W-2297 卡箍组件 | 拧紧至扭矩为 |
| 4 | 4 | 2N-2766 锁紧螺母 | 组装前，向锁紧螺母的螺纹上涂覆 Loctite C5A 铜防咬合剂。 |
| 拧紧至扭矩为 |
|||
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Turbocharger
CG137-08 and CG137-12 Industrial Engines Lubrication System
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C3.4B Engines for Caterpillar Built Machines Compression - Test
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
C13, C15, and C18 Tier 4 Final Engines Flywheel
C15 and C18 Engines for Caterpillar Built Machines Engine Trunnion
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}
2011/07/22 Proper Installation of Exhaust Bellows for C175-16 Generator Set Engines {1059}
CG137-08 and CG137-12 Engines Exhaust Bypass - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators General Hazard Information
CG137-08 and CG137-12 Engines Exhaust Manifold - Remove and Install
CX28 On-Highway Transmission Transfer Gear Oil Level - Check
349F and 352F Excavators Machine System Specifications Solenoid Valve (System 16, 1-Way, 2-Pump)
3516C Generator Set Engines Engine Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
G3600 A4 Engines Engine Speed Sensor
G3516H and G3520H Generator Set Engines Atmospheric Pressure Sensor
C175-16 Locomotive Engine Crankcase Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C175-16 Locomotive Engine Fuel Pressure Sensor
3512C and 3516C Marine Engines Air Starting Motor
CX28 On-Highway Transmission Transfer Gear Oil - Change