Turbocharger - Remove
Start By:
- If necessary, remove the air inlet elbows. Refer to Disassembly and Assembly, "Air Lines - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the engine into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
Illustration 1 g02430916 - Remove the exhaust piping from the turbocharger.
- If necessary, remove clamp (6). Disconnect the air inlet elbow from the turbocharger.
- If necessary, remove clamp (1). Disconnect the air pipe assembly from the turbocharger.
- Disconnect hose assembly (2) and hose assembly (5) from the turbocharger. Remove the O-ring seals.
- Remove the bolts and disconnect tube assemblies (3) and (4) from the turbocharger. Remove the gaskets from the turbocharger.
Show/hide table
Illustration 2 g02430976 - Attach a suitable lifting device to turbocharger (7). The weight of turbocharger (7) is approximately
42 kg (93 lb) . - Remove locknuts (8).
- Remove turbocharger (7) and the gasket from the exhaust manifold.
Caterpillar Information System:
C13 and C15 Generator Set Engines Aftercooler - Test
349F and 352F Excavators Engine Starting
C15 Petroleum Engines Alternator Is Noisy
C15 Petroleum Engines Fuel Filter Base - Install
TA19 Transmission Pump Drive - Install
C15 Petroleum Engines Fuel Filter Base - Remove
C15 Petroleum Engines Fuel Priming Pump - Remove and Install
300.9D and 300.9D VPS Mini Hydraulic Excavator Operator Station
300.9D and 300.9D VPS Mini Hydraulic Excavator Slope Operation
300.9D and 300.9D VPS Mini Hydraulic Excavator Engine Stopping
300.9D and 300.9D VPS Mini Hydraulic Excavator Visibility Information
3116 and 3126 Marine Engines Reference Information
Ice in the Cooling Systems of C175-16 Generator Sets{1350} Ice in the Cooling Systems of C175-16 Generator Sets{1350}
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Safety Signs and Labels
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys General Hazard Information
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Fire Prevention and Explosion Prevention
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Electrical System
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Modem
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Ethernet Interface
C15 Petroleum Engines Turbocharger - Install
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Information Plate
2011/02/17 Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Receiving and Handling