3516C Locomotive Engines Caterpillar


Auxiliary Water Pump - Disassemble

Usage:

3516C F3Z

Disassembly Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
5F-7465  Puller 
5P-8244 Washer 
8S-4730 Bolt 


    Illustration 1g02402520

    ------ WARNING! ------

    Personal injury can result from being struck by parts propelled by a released spring force.

    Make sure to wear all necessary protective equipment.

    Follow the recommended procedure and use all recommended tooling to release the spring force.


  1. Remove nuts (1). Remove cover (2) and the O-ring seal.

  2. Use Tooling (A) to remove impeller (3).


    Illustration 2g02402836

  3. Remove seal group (4) from the shaft.


    Illustration 3g02402837

  4. Remove bolts (7) and thrust washer (8). Use a soft hammer and remove shaft (5) from the auxiliary water pump housing.

  5. Remove all of the seals and inspect the auxiliary water pump housing.

  6. If necessary, remove plug (6).

Caterpillar Information System:

C32 Generator Set Starting the Engine
CG137-08 and CG137-12 Industrial Engines Fuel Shutoff - Test
Installation of Improved Battery Charger on Certain C27 Generator Sets{1401, 751B} Installation of Improved Battery Charger on Certain C27 Generator Sets{1401, 751B}
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Assemble
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Disassemble
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Install
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Remove
2011/08/10 New Line Relief Valves are Now Used for Certain Excavators and Mobile Hydraulic Power Units {5069, 5117}
3612 and 3616 Fast Vessel Engines Maintenance Interval Schedule
3516C Locomotive Engines Auxiliary Water Pump - Install
3612 and 3616 Fast Vessel Engines Maintenance Interval Schedule
Filtration Procedure for Kidney Looping Off-Highway Truck Steering Oil {0680, 4300, 4332, 5050, 7542} Filtration Procedure for Kidney Looping Off-Highway Truck Steering Oil {0680, 4300, 4332, 5050, 7542}
CG137-08 and CG137-12 Industrial Engines Oxygen Level - Test
3500 and 3500B Engines Electronic Modular Control Panel 4 (EMCP 4)
C32 Generator Set Electronic Modular Control Panel 3 (EMCP 3)
C32 Generator Set Fuel System - Prime
UPSB505 Uninterruptible Power Supply General Information
2011/02/23 Dealer Solution Network Now Provides Product Support for Uninterruptible Power Supply {4480}
3516C Locomotive Engines Auxiliary Water Pump - Assemble
C11 and C13 Industrial Engines Product Description
UPSB505 Uninterruptible Power Supply Fire Prevention and Explosion Prevention
UPSB505 Uninterruptible Power Supply Product Identification
3516C Locomotive Engines Engine Oil Pump - Remove
UPSB505 Uninterruptible Power Supply Safety Signs and Labels
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.