Air Lines
Show/hide table
| |
| Illustration 1 | g03270836 |
|
Bottom view of engine | |
Show/hide table
| Specification for 346-1613 Air Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 0S-1585 Bolt | Before assembly, apply Loctite C5A copper anti-seize to the threads and bearing surfaces.
Torque to |
| 2 | 10 | 8S-2331 Bolt | Before assembly, apply Loctite C5A copper anti-seize to the threads and bearing surfaces. |
Show/hide table
| |
| Illustration 2 | g03270837 |
|
Right side view of engine | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 3 | 2 | 031-3185 Bolt | Before assembly, apply Loctite C5A copper anti-seize to the threads and bearing surfaces. |
| 4 | 1 | 183-7232 Bellows As | Orient the bellows assembly in the direction of the air flow as shown in the Illustration 2. |
| 5 | 5 | 8S-2332 Bolt | Before assembly, apply Loctite C5A copper anti-seize to the threads and bearing surfaces. |
| 6 | 1 | 8B-7997 Bolt | Before assembly, apply Loctite C5A copper anti-seize to the threads and bearing surfaces. |
Caterpillar Information System:
C6.6 Industrial Engine Fuel Injection Lines - Remove
C6.6 Industrial Engine Fuel Manifold (Rail) - Remove and Install
C6.6 Industrial Engine Fuel Filter Base - Remove and Install - Single Secondary Fuel Filter
C6.6 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
C4.4 Industrial Engine Crankshaft Pulley - Check
2010/05/06 Changes in Performance After Replacing High Hour Fuel Injectors on Certain 3412E Marine Engines {1251, 1254, 1290, 1713}
C9.3 Engines for Caterpillar Built Machines Front Cover - Remove and Install
2010/05/31 A New Spark Plug Is Used in G3600 Engines {1550, 1555}
C27 and C32 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Clean
349F and 352F Excavators Hydraulic System Pump Control (Negative Flow) - Test
C9.3 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
CB22B, CB24B, CB32B and CC24B Utility Compactors Fuel System - Prime
C6.6 Industrial Engine Fuel Injection Lines - Install
C6.6 Industrial Engine Inlet Air Control - Remove - NRS Inlet Air Mixer
C6.6 Industrial Engine Inlet Air Control - Install - NRS Inlet Air Mixer
C6.6 Industrial Engine Fuel Injection Pump - Remove
Procedure to Install a New Software with Droop Capability for Load Sharing on Certain C11 and C15 Industrial Engines{1901, 1920} Procedure to Install a New Software with Droop Capability for Load Sharing on Certain C11 and C15 Industrial Engines{1901, 1920}
C6.6 Industrial Engine Fuel Injection Pump - Install
C6.6 Industrial Engine Fuel Injection Pump Gear - Remove
C6.6 Industrial Engine Position the Valve Mechanism Before Maintenance Procedures
797F and 797F XQ Off-Highway Trucks Machine Systems Gear Pump (Brake, Rear Axle Lubrication) - Remove and Install
C4.4 Industrial Engine Position the Valve Mechanism Before Maintenance Procedures
3612 and 3616 Fast Vessel Engines Customer Assistance
C18 Marine Engine Sensors and Electrical Components - Engines with 1000 HP or Greater