Normal Wear on the Cylinder Liners of Some C11 and C13 Engines {1201}
- Engine:
- C11 (S/N: KCA1-UP)
- C13 (S/N: KCB1-UP; LEE1-UP)
The gasket that is used on some C11 and C13 Engines leaves some wear on the cylinder liner outside of the sealing area of the fire ring.
Show/hide table
Illustration 1 | g02065893 |
(1) Sealing area of the fire ring (2) Area of wear from the gasket |
This wear is considered normal. The wear does not affect the sealing capability of the existing cylinder head gasket or a new cylinder head gasket. Refer to Illustration 1 for an example of the wear to the cylinder liner.
Caterpillar Information System:
G3500 Engines Model View Illustrations
3412E and C30 Marine Engines Maintenance Interval Schedule - Fast Craft
3412E and C30 Marine Engines Maintenance Interval Schedule - Standard
C9.3 Tier 4 Final Engines Crankshaft Pulley
C13 Industrial Engines Water Pump
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
C13, C15, and C18 Tier 4 Interim Engines Solenoid Valve - Test
3512B HD SR500 Generator Sets Generator Bearing Temperature - Test/Record
3512C HD SR500 Generator Sets Manual Stop Procedure
C18 Generator Sets Overspeed
Idler Service Evaluation Checklist {4159, 4167} Idler Service Evaluation Checklist {4159, 4167}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561} Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181} Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
C27 and C32 Generator Set Engines Fuel Transfer Pump
349F and 352F Excavators Machine System Cylinders (Boom, Stick and Bucket)
C9.3 Tier 4 Interim Engines Configuration Parameters
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C27 and C32 Tier 4 Engines Water Pump - Test
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561} Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines (DPF Inlet)
C27 and C32 Engines for Caterpillar Built Machines Exhaust Temperature Is High