Engine Oil Filter Base
Show/hide table
Illustration 1 | g02678279 |
Show/hide table
Specification for 344-5154 Oil Filter Base Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 242-3864 Spring | Length under test force is |
Test force is |
|||
Free length after test is |
Show/hide table
Illustration 2 | g02678280 |
Show/hide table
Specification for 344-5154 Oil Filter Base Gp | |||
Item | Qty | Part | Specification Description |
- | - | - | Tighten the 359-5999 Base bolts in a numerical sequence as shown in the Illustration 2 to the standard torque. |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Interim Engines Solenoid Valve - Test
3512B HD SR500 Generator Sets Generator Bearing Temperature - Test/Record
3512C HD SR500 Generator Sets Manual Stop Procedure
C18 Generator Sets Overspeed
Idler Service Evaluation Checklist {4159, 4167} Idler Service Evaluation Checklist {4159, 4167}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561} Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
G3500H 60Hz Generator Sets Fluid Recommendations
C15 and C18 Petroleum Generator Sets Battery Disconnect Switch - If Equipped
Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408, 1900} Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408, 1900}
EMCP4.1/EMCP4.2 General Information
C7 and C9 On-Highway Engines Diesel Particulate Filter Collects Excessive Soot
3512E HD Petroleum Engine Product Description
C13 Industrial Engines Water Pump
C9.3 Tier 4 Final Engines Crankshaft Pulley
3412E and C30 Marine Engines Maintenance Interval Schedule - Standard
3412E and C30 Marine Engines Maintenance Interval Schedule - Fast Craft
G3500 Engines Model View Illustrations
2009/12/24 Normal Wear on the Cylinder Liners of Some C11 and C13 Engines {1201}
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181} Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
C27 and C32 Generator Set Engines Fuel Transfer Pump
349F and 352F Excavators Machine System Cylinders (Boom, Stick and Bucket)
C9.3 Tier 4 Interim Engines Configuration Parameters