Updated Instruction For The Bypass Harness {0785, 1408}
- Caterpillar Products:
- All
ReferenceTool News, 12 February 2008
The 167-9225 Harness and 217-0114 Adapter Cable As will damage the internal circuitry of machine electronic control module's. This will cause the module to become unusable. Only use the 217-0114 Adapter Cable As on engine electronic control modules.
Show/hide table
| NOTICE |
|---|
Do not connect the 167-9225 Harness and 217-0114 Adapter Cable As to the machine electronic control module's, as damage will occur to the machine electronic control modules. |
Refer to Tool News, 12 February 2008 for additional information. The Tool News publication is available by selecting the "Dealer Service Tools Catalog" link on SIS.
Caterpillar Information System:
2008/04/14 Increased Support for Repair Parts is Available for Products that are sold by Dealer Service Tools from Advanced Technology Services {0599}
C7 PETROLEUM Petroleum Engine Housing (Front) - Install
C7 PETROLEUM Petroleum Engine Housing (Front) - Remove
C175-16 and C175-20 Generator Set Engines Engine Oil Pan
C175-16 and C175-20 Generator Set Engines Engine Oil Pan
C4.4 and C6.6 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
2008/03/17 A New Bearing Block within the Governor is Now Used {1000}
C7 PETROLEUM Petroleum Engine Crankshaft Rear Seal - Install
C7 PETROLEUM Petroleum Engine Water Temperature Regulator - Remove and Install
C175-16 and C175-20 Generator Set Engines Cylinder Head Valves
345D, 349D and 349D2 Excavator Machine System Specifications Hydraulic Oil Cooler Lines Group
345D, 349D and 349D2 Excavator Machine System Specifications Swing Motor Lines
Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190} Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190}
C7 PETROLEUM Petroleum Engine Valve Mechanism Cover - Remove and Install
Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510} Information on the Clean Gas Induction (CGI) Flex Pipe Connection Found Broken in Some 2007 Emissions Compliant Engines{1071, 108N, 5510}
345D, 349D and 349D2 Excavator Machine System Specifications Main Hydraulic Pump Mounting
3516C Locomotive Engine Configuration Parameters
C175-16 and C175-20 Generator Set Engines Air Lines
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines - Joystick
3516C Locomotive Engine Maintenance Interval Schedule
C175-16 and C175-20 Generator Set Engines Air Lines
C32 Marine Engine Refill Capacities and Recommendations
Procedure to Install a Service Kit for the Unloader for the Air Compressor{1803} Procedure to Install a Service Kit for the Unloader for the Air Compressor{1803}
Some 3500 Cylinder Packs May Have Incorrect Pistons{1225} Some 3500 Cylinder Packs May Have Incorrect Pistons{1225}