System Voltage Problem
使用本步骤诊断和排除电气系统故障,或者在下列任一事件代码为现行状态或被记录时使用本步骤。
Show/hide table
事件代码     | ||
---|---|---|
说明     | 激活代码的条件     | 系统响应     |
E043(1)系统电压低警告     | 系统电压低于触发点,延迟时间已经终止。     | 警报输出被激活。 系统将会记录该代码。     |
E875(1)系统电压低     | ||
E042(3)系统电压低停机     | 停机输出被启动。 系统将会记录该代码。 发动机停机。 | |
E875(3)系统电压低     | ||
E050(1)系统电压高警告     | 系统电压高于触发点,延迟时间已经终止。     | 警报输出被激活。 系统将会记录该代码。     |
E876(1)系统电压高     |
注: 请参考故障诊断与排除, "发动机监控系统"以了解关于触发点和延迟时间的信息。
可能原因
电气系统存在故障。
修理建议
对电气系统进行故障诊断与排除。 请参考故障诊断与排除, "电源 - 测试"。
Caterpillar Information System:
C13 Engine Turbocharger - Install - Low Pressure
C13 Engine Turbocharger - Remove - Low Pressure
G3520C and G3520E Generator Set Engines Coolant Pressure Is High
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Door Latch
C13 Engine Turbocharger - Install - High Pressure
C13 Engine Turbocharger - Remove - High Pressure
G3520C and G3520E Generator Set Engines Coolant Pressure Is Low
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Door Pull and Retaining Ring
G3520C and G3520E Generator Set Engines Inlet Air Temperature Is High
G3520C and G3520E Generator Set Engines Fuel Pressure Problem
G3520C and G3520E Generator Set Engines Engine Overspeeds
G3520C and G3520E Generator Set Engines Oil Temperature Is High
C13 Engine Precooler - Remove
C13 Engine Precooler - Install
C13 Engine Valve Mechanism Cover - Remove and Install
C13 Engine Cylinder Head - Remove
2006/08/01 New Pressure Sensors Are Now Available {1718, 1917, 1923, 1924}
C175-16 Petroleum Engines Engine Harness
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Monitoring System
C13 Engine Cylinder Head - Install
C13 Engine Coolant Temperature Sensor - Remove and Install
C13 Engine Inlet Manifold Temperature Sensor - Remove and Install
C13 Engine Inlet Air Temperature Sensor - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Personal Computer to UPS Connection