Alternator - Remove - Engines With an Automatic Belt Tensioner
开始:
- 拆下交流发电机皮带。 请参阅拆解和组装交流发电机, "传动带 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将蓄电池断路开关转到断开位置。
- 在线束组件的连接处做出临时的识别标记。
Show/hide table
图 1 g01271317 典型实例 - 将线束组件从交流发电机 (3) 上断开。
- 从交流发电机 (3) 上卸下螺栓 (5)。
- 卸下螺母 (1) 和垫圈 (2)。 从交流发电机 (3) 上卸下螺栓 (6)。 从交流发电机支架 (4) 上卸下交流发电机。
- 如果必要,请按照步骤 6.a 和步骤 6.b 卸下交流发电机 (1) 上的皮带轮 (8)。
- 使用六角板手固定交流发电机 (3) 的轴。 使用带曲柄的梅花扳手(套筒扳手)拧松螺母 (7)。
- 从交流发电机 (3) 上卸下螺母 (7) 和皮带轮 (8)。
Caterpillar Information System:
C4.4 Industrial Engine Alternator - Install - Engines With an Automatic Belt Tensioner
C4.4 Industrial Engine Air Compressor - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Thermistor (Controls Cabinet)
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Storage
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Vacuum Pump Startup - Required Procedure After Extended Storage
3618 Engine Product Lifting
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Power Supply PWAs
2006/06/05 207-5034 Stud Tensioner Tool Gp and 191-5320 Stud Tensioner Tool Gp Require Different Hydraulic Pressures {0701, 0703, 0705, 1100, 1200}
2006/06/01 Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/12 Replacing Lifters for the Unit Injectors {1209, 1290}
G3600 Engines Cylinder Block
3612 and 3616 Engines Flexible Coupling
C4.4 Industrial Engine Alternator - Install - Engines Without an Automatic Belt Tensioner
C4.4 Industrial Engine Alternator - Remove - Engines Without an Automatic Belt Tensioner
C4.4 Industrial Engine Alternator Belt - Remove and Install - Engines With an Automatic Belt Tensioner
C4.4 Industrial Engine Balancer - Install
C4.4 Engines for Caterpillar Built Machines Turbocharger - Remove
C4.4 Industrial Engine Balancer - Remove
C4.4 Industrial Engine Boost Pressure Sensor - Remove and Install
C4.4 Industrial Engine Camshaft - Remove and Install
C4.4 Industrial Engine Camshaft Bearings - Remove and Install
C4.4 Industrial Engine Camshaft Gear - Remove and Install
C4.4 Industrial Engine Connecting Rod Bearings - Install - Connecting rods in position
C4.4 Industrial Engine Connecting Rod Bearings - Remove - Connecting rods in position