C11 and C13 Petroleum Engines Caterpillar

Removal Procedure

Start By:

1. Remove the variable valve actuator. Refer to Disassembly and Assembly, "Valve Actuator (Variable) - Remove and Install".

Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.

Show/hide table

Illustration 1	g01261872

1. Remove studs (1) and bolts (2).

2. Remove rocker arm and shaft (3). Remove pushrods (4).