Winding - Test
Show/hide table
图 1 | g01388839 |
1800 机架系列 PMPE 发电机接线图 (CR1-C6) 二级管 (CR7) 可变电阻 (L1) 励磁机定子 (L2) 励磁机转子 (L3) 主转子 (L4) 主定子 (L5) PMG 定子 (PM) 永磁铁 (RFA) 旋转磁场总成 (CT1) 可选降压变压器 (T0、T1、T2、T3、T7、T8、T9) 发电机端子 |
Show/hide table
数量     | 所需工具     |
1     | 低欧姆表     |
测量下列绕组的电阻值: (L1), (L2), (L3), (L4) 和 (L5). 测量电阻前,应将要测试的绕组与其他部件断开连接。
注: 绕组的温度会影响电阻值。 当绕组温度上升时,绕组电阻增大。 当绕组温度下降时,绕组电阻降低。 因此只有当绕组处于室温时,才能进行正确的测量。
下面的电阻测量值是近似值。 如果测得的值与所列的近似值不接近,绕组很可能已损坏。 如需了解更精确的电阻值,请参阅技术营销信息 (TMI)。 参阅所述的发电机配置总成。
下面的绕组电阻极小: (L2), (L4) 和 (L5). 这些绕组的电阻值接近于零欧姆。 应使用毫欧姆表测量绕组的电阻。
励磁机转子 (L2) - 参见表 2。
主定子 (L4) - 小于 0.1 欧姆
副励磁机定子 (L5) - 小于 0.1 欧姆
使用万用表来测量磁场绕组 (L1) 和 (L3) 的电阻。
励磁机磁场(定子) (L1) - 参见表 2。
主磁场(转子) (L3) - 约 0.35 至 1.2 欧姆
注: 在任何绕组与地线之间均不应导通。 任意绕组之间也不应导通。
Show/hide table
    | L1 – 励磁机磁场     | L2 – 励磁机转子     | 主磁场 – 转子     |
1800 机架     | 10.9 欧姆     | 0.05 欧姆     | 0.9 欧姆     |
1600 机架     | 10 欧姆     | 0.06 欧姆     | 0.5 欧姆     |
1400 机架     | 11 欧姆     | 0.06 欧姆     | 0.35 欧姆     |
Caterpillar Information System:
3126B and 3126E Truck Engines Gear Group (Front)
C9 On-highway Engines Model View Illustrations
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714} Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
C9 Generator Set Engine Fan - Remove and Install
SR5 Electric Power Generation Rotating Rectifier - Test
SR5 Electric Power Generation Varistor - Test
C9 Generator Set Engine Radiator Core - Remove and Install
Electrical Application and Installation Guide for Petroleum Transmissions and Petroleum Power Train Packages{1408, 1435, 3030, 7490, 7553} Electrical Application and Installation Guide for Petroleum Transmissions and Petroleum Power Train Packages{1408, 1435, 3030, 7490, 7553}
C9 Generator Set Engine Radiator Top Tank - Remove and Install
336E Excavator Machine System Specifications Stick Cylinder Lines
3126B and 3126E Truck Engines Front Housing and Covers
SR5 Electric Power Generation Generator Set - Test
SR5 Electric Power Generation Insulation - Test
SR5 Electric Power Generation Resistor - Test
SR5 Electric Power Generation Generator - Dry
3176C and 3196 Engines for Caterpillar Built Machines Flywheel Housing
C6.6 Generator Set Engine Speed/Timing Sensor Circuit - Test
CX31 On-Highway Transmission Power Train Control Manifold - Remove
C9 Generator Set Engine Engine - Remove
SR5 Electric Power Generation Leads - Connect
C9 Generator Set Engine Engine - Install
C6.6 Engines for Caterpillar Built Machines Exhaust Manifold
325D and 329D Excavators Hydraulic System Pilot Valve (Swing Parking Brake)
SR5 Electric Power Generation Exciter Field - Flash