Fuel System Secondary Filter - Replace
Show/hide table
Illustration 1 | g00480346 |
- Remove the secondary fuel filter. Dispose of the used filter properly.
Show/hide table
Illustration 2 | g00489380 |
- Clean the filter mounting base. Make sure that all of the used seal is removed.
- Apply a light coat of clean fuel to the seal of the new filter.
- Install the new filter by hand. When the seal contacts the filter mounting base, tighten the filter by another 3/4 turn.
Note: There are rotation index marks on the filter at 90 degree intervals. Use the rotation index marks as a guide for proper tightening.
- Prime the fuel system.
Reference: Refer to Operation and Maintenance Manual, "Fuel System - Prime" for the correct procedure.
Caterpillar Information System:
D6M Track-Type Tractor Machine Systems Battery - Remove and Install
D6M Track-Type Tractor Machine Systems Air Conditioner and Heater Fan Motor - Remove and Install
D6M Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Steering Control
637E Series II Wheel Tractor-Scrapers Cushion-Hitch Control
515 Wheel Skidder and 525 Wheel Skidder Window Wiper and Washer Control
623F Wheel Tractor-Scraper Power Train Transmission Electronic Control System
D6R Track-Type Tractor Power Train Brake Control Valve
D6F and D6G Track-Type Tractors Power Train General Information
623F Wheel Tractor-Scraper 3406C Engine Supplement Oil Pan - Remove and Install
631E Series II Wheel Tractor-Scrapers Steering Column Tilt Control
3406C Engines for Caterpillar Built Machines Cylinder Head Valves
D6M Track-Type Tractor Machine Systems Bulldozer (VPAT) - Install
D6M Track-Type Tractor Machine Systems Bulldozer (VPAT) - Remove
D6M Track-Type Tractor Machine Systems Bulldozer - Assemble
D6M Track-Type Tractor Machine Systems Bulldozer - Disassemble
D6M Track-Type Tractor Machine Systems Bulldozer - Install
D6M Track-Type Tractor Machine Systems Bulldozer - Remove
D6M Track-Type Tractor Machine Systems Bulldozer Angle Cylinder - Install
D6M Track-Type Tractor Machine Systems Bulldozer Angle Cylinder - Remove
D6M Track-Type Tractor Machine Systems Bulldozer C-Frame - Remove and Install
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Assemble
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Disassemble
D6M Track-Type Tractor Machine Systems Bulldozer Control Valve - Install