Crankshaft Pulley - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Description     | Qty     |
A     | 8S-2264     | Puller Group     | 1     |
6V-3668 | Bolt     | 3     |
- Remove nut (5) and washer (3) from crankshaft (4) and pulley (2) .
Show/hide table
Illustration 1 | g00827213 |
Show/hide table
Illustration 2 | g00827241 |
- Use Tooling (A) in order to remove crankshaft pulley (2) from crankshaft (4) .
- Remove woodruff key (1) from crankshaft (4) .
Installation Procedure
- Install woodruff key (1) on crankshaft (4) .
Show/hide table
Illustration 3 | g00827213 |
- Position crankshaft pulley (2) on crankshaft (4) .
- Position washer (3) on crankshaft (4) .
- Lubricate nut (5) with clean engine oil and install the nut. Tighten nut (5) to a torque of 304 N·m (224 lb ft).
Caterpillar Information System:
Installation of Fuel/Water Separator{1260, 1263} Installation of Fuel/Water Separator{1260, 1263}
3500B and 3500C Marine Propulsion Engines System Configuration Parameters
C1.5 and C2.2 Marine Generator Set Engines Flywheel Housing - Remove and Install
3406C Generator Sets Sensors and Electrical Components
C1.5 and C2.2 Generator Set Engines Fuel Injection Pump - Install
C1.5 and C2.2 Generator Set Engines Fuel Injection Lines - Remove and Install
3456 Generator Sets Generator Installation
3500B Engines for Caterpillar Built Power Modules Thermostatic Valve
3500B and 3500C Marine Propulsion Engines Engine Monitoring System
3456 Generator Sets Generator Identification
G3520C and G3520E Generator Set Engines Throttle Control Valve - Install
G3520C and G3520E Generator Set Engines Throttle Control Valve - Remove
C1.5 and C2.2 Marine Generator Set Engines Valve Mechanism Cover - Remove and Install
C1.5 and C2.2 Marine Generator Set Engines Rocker Shaft and Pushrod - Install
3456 Generator Sets Engine Shutoffs and Engine Alarms
3456 Generator Sets Overspeed
3412C Generator Sets Starting the Engine - EMCP II and EMCP II+ (If Equipped)
C1.5 and C2.2 Marine Generator Set Engines Cylinder Head - Remove
C1.5 and C2.2 Marine Generator Set Engines Cylinder Head - Install
C15 and C18 Petroleum Generator Sets Generator Operation
C1.5 and C2.2 Generator Set Engines Engine Oil Pan - Remove and Install
Caterpillar On-Highway Diesel Engine Fluids Recommendations Cold Weather Lubricants
C1.5 and C2.2 Marine Generator Set Engines Pistons and Connecting Rods - Install
C1.5 and C2.2 Generator Set Engines Crankshaft Main Bearings - Remove