Operational Checks
可以使用运行检查来确定转向系统中的故障。 开始检查之前,请参阅故障诊断与排除, "故障诊断与排除时的机器准备事项"和故障诊断与排除, "目视检查"。
此程序将帮助您确定任何转向液压系统故障。
- 前轮必须位于干燥、平整的坚硬地面上,且转向系统内的液压油必须温暖。
- 起动机器。 在一档,转动方向盘的同时缓慢驱动机器。 驾驶机器直到液压油温约为 65°C (150°F)。
- 停下机器。
注: 确保在进行下列步骤时,制动器处于释放状态。
- 在发动机高怠速下测试转向系统。
- 旋转方向盘。 测量前轮从完全左转位置转到完全右转位置并返回完全左转位置所需要的时间。 每秒将方向盘转一圈。
- 请参阅本机器的测试和调整, "工作表",记录测试结果。
此步骤还将有助于确定任何转向液压系统故障。
- 重复上一测试的步骤 1 至步骤 4。
- 一直向左转动方向盘直到到达左转向止点。 完全向右转动方向盘直到达到右转向止点。 每秒将方向盘转一圈。
- 请参阅本机器的测试和调整, "工作表",记录方向盘的圈数。
如果有一项检查结果同技术规格不符,则转向系统可能存在故障。
Caterpillar Information System:
C1.5 and C2.2 Generator Sets Cooling System Coolant (ELC) - Change
C11, C13 and C15 On-highway Engines 0110-11 Very High Coolant Temperature (61)
C11, C13 and C15 On-highway Engines 0110-00 High Coolant Temperature Warning (61)
G3500 Generator Sets After Starting Engine
G3500 Generator Sets Starting the Engine
PMG3516 Power Module Before Starting Engine
C9 Urban Transit Bus Engine Water Pump - Inspect
C9 Urban Transit Bus Engine Walk-Around Inspection
C7 and C9 On-Highway Engines Input Selections
3126B and 3126E On-highway Engines 0071-14 PTO Shutdown (47)
3126B and 3126E On-highway Engines 0071-01 Idle Shutdown (47)
3126B and 3126E On-highway Engines 0071-00 Idle Shutdown Override (01)
3056E Industrial Engine Air Compressor - Remove and Install
G3500 Generator Sets Generator Operation
797B Off-Highway Truck Steering System Steering System
C11, C13 and C15 On-highway Engines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Fumes Disposal Filter - Drain
C9 Urban Transit Bus Engine Air in Fuel - Test
C9 Urban Transit Bus Engine Electronic Unit Injector - Test
C9 Urban Transit Bus Engine Fuel System Pressure - Test
C9 Urban Transit Bus Engine Inlet Manifold Pressure - Test
C9 Urban Transit Bus Engine Aftercooler - Test
C9 Urban Transit Bus Engine Engine Crankcase Pressure (Blowby) - Test
3500B Locomotive Engines Air Shutoff