Replacement Timing Belts And Variable Belt For Fuel Injection Test Benches Available From Caterpillar{0652,1250}
Usage:
All Caterpillar Fuel Injection Test Benches
Five timing belts and a variable belt are available as replacement parts through Caterpillar for Caterpillar fuel injection test benches.
Formerly, the belts only were available from Kent-Moore Corporation.
The chart which follows has both the Caterpillar part numbers and the Kent-Moore part numbers.
The Kent-Moore part numbers are to be changed to Caterpillar part numbers in "Operation, Maintenance And Parts List Information For Fuel Injection Test Benches," Special Instruction, Form No. SEHS7637. The chart which follows gives the page number, item number, Kent-Moore part number and Caterpillar part number.
Caterpillar Information System:
1980/12/15 New Turbocharger, Turbocharger Oil Lines Group And Aftercooler Air Lines Group Used{1052,1058,1063,1307,1309}
1980/12/15 New Control Valve Group Used To Prevent Ratchet-Type Noise And Rough Clutch Engagement{3313}
1980/12/15 Be Sure To Cut The Center Gasket Even With Top Surface Of Oil Pan Sections To Prevent Oil Leakage{1302}
1980/12/15 New Bearing Sizes And Identification Codes For AiResearch Remanufactured Turbocharger Cartridges{1053}
1980/12/01 6V4085 Torque Multiplier Group Available{0614}
1980/12/01 Inspect All Engine Oil And Fuel Filter Elements Before Installation{1000,1261,1318}
1980/12/01 Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01 New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01 New Service Handle Kit Permits Cab Door To Be Opened From Inside While Locked (Fastened With Lock){7308,7301}
1980/12/01 Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly{1102}
1980/12/01 Exhaust Manifold And Air Lines Groups Changed To Prevent Exhaust Leakage And Damage To Manifold Gaskets And Mounting Studs{1059,1061}
1980/12/01 Direct Inquiry Service Information Retrieval System (SIRS) Available To U.S. And Canadian Dealers{0374}
1980/12/22 6V4019 Camshaft Pilot Group Is Available{0622,1210,1211,1201}
1980/12/22 Tires Are Filled With Nitrogen (N2){4203}
1980/12/22 Exhaust Elbow Support Improved{1059,1061}
1980/12/22 New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}
1980/12/22 Wrong Turbocharger Group Shown In Parts Book{1052,0374}
1981/01/12 Improvements Made To 5P9718 And 6V186 Disc Pads Used During Gasket Removal{0675,0670}
1981/01/19 New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19 Thicker Layer Of Chrome Now Used On Governor Spring Guide To Extend Its Service Life{1264}
1981/01/19 6V3141 And 6V3142 Puller Plates Available For Removal Of Tube And Gland From Front Suspension Groups{7201,0621}
1981/01/19 Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19 New Sure Seal Electrical Connectors Used In Electrical Wiring Harnesses; Use 6V3000 Seal Repair Kit To Repair Sure Seal Electrical Connectors{0611,1408}
1981/01/19 Be Sure You Assemble The Turbocharger Lubrication Valve Correctly{1309,1052,1300}