Bulkhead Nuts
Show/hide table
Ilustrasi 1 | g01848733 |
(1 ) Konektor sekat (1A) Mur sekat |
Catatan: Konektor sekat mungkin memiliki koneksi yang berbeda. Jenis koneksi cairan tidak mempengaruhi torsi untuk mur (1A) .
Catatan: Saat Anda merakit koneksi cairan, jangan gunakan mur sekat (1A) sebagai pengungkit untuk kunci penopang. Gunakan hex (bagian segi enam) di bodi (1) konektor untuk pengungkit.
Show/hide table
Ukuran Ulir Inci     |
Torsi untuk Mur Sekat Muka O-ring     |
9/16     | 45 ± 7 N·m (33 ± 5 lb ft)     |
11/16     | 80 ± 12 N·m (59 ± 9 lb ft)     |
13/16     | 100 ± 15 N·m (74 ± 11 lb ft)     |
1     | 130 ± 20 N·m (96 ± 15 lb ft)     |
1 3/16     | 180 ± 27 N·m (133 ± 20 lb ft)     |
1 7/16     | 350 ± 53 N·m (258 ± 39 lb ft)     |
1 11/16     | 420 ± 63 N·m (310 ± 46 lb ft)     |
2     | 500 ± 75 N·m (369 ± 55 lb ft)     |
Show/hide table
Ukuran Ulir Inci     |
Torsi untuk Mur Sekat Kembang 37 derajat     |
5/16     | 13 ± 2 N·m (115 ± 18 lb in)     |
3/8     | 17 ± 3 N·m (150 ± 27 lb in)     |
7/16     | 30 ± 5 N·m (266 ± 44 lb in)     |
1/2     | 35 ± 5 N·m (26 ± 4 lb ft)     |
9/16     | 40 ± 6 N·m (30 ± 4 lb ft)     |
3/4     | 70 ± 11 N·m (52 ± 8 lb ft)     |
7/8     | 100 ± 15 N·m (74 ± 11 lb ft)     |
1 1/16     | 160 ± 24 N·m (118 ± 18 lb ft)     |
1 3/16     | 180 ± 27 N·m (132 ± 20 lb ft)     |
1 5/16     | 260 ± 39 N·m (192 ± 29 lb ft)     |
1 5/8     | 350 ± 53 N·m (258 ± 39 lb ft)     |
1 7/8     | 400 ± 60 N·m (295 ± 44 lb ft)     |
2 1/2     | 500 ± 75 N·m (369 ± 55 lb ft)     |
Caterpillar Information System:
Torque Specifications Air Brake Fittings
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Alternator and Regulator
2002/08/01 Relocation Of The Service Center For 3600 Fuel Injectors {1254}
G3500B Engines Electronic Control Module (ECM) - 20 Cylinders
2002/08/01 2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
C9 Urban Transit Bus Engine Customer Specified Parameters Table
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Filter
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Relief Valve
C9 Marine Auxiliary and Generator Set Engines Aftercooler Condensate Drain Valve - Inspect/Clean
C-15 Truck Engine Wastegate Solenoid
C-10 and C-12 Truck Engines Fuel System
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Torque Specifications Ground Engaging Tool (G.E.T.) Fasteners
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Electrical System
3512B Marine Auxiliary Engine Manual Barring Group - Air Interlock
C-18 Truck Engines Engine Operation
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System - Prime
C-15 Truck Engine Electric Starting Motor
C-18 Truck Engines Customer Specified Parameters
797 and 797B Off-Highway Truck Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System
2002/08/01 Guidelines for Water Pump Visual Inspection {1361}
G3500B Engines Crankshaft Position for Valve Lash Setting
2002/08/01 The Routing Has Been Changed For The New Vent Line In The Oil Level Regulator Groups {1334}