2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
- Truck: Engines
- Electronically Controlled
The following issues have been resolved by the Software Upgrade for Cat ET:
- Program the following parameters: personality module code, FLS and FTS.
- Open report files from Cat ET.
Installing the Software Upgrade for Cat ET
Perform the following steps in order to install the software upgrade for the Cat ET.
- Use the following web sites to access Cat ET:
- Power Net at https://engines.cat.com/infocast/frames/truck/service/catet/
- NACD Infocast at https://nacd.cat.com/infocast/frames/psfulfill/sfulfill/et/
- CAPL APDNet at https://catasia.cat.com/infocast/frames/pss/service/et/
- CCL APDNet at https://catchina.cat.com/infocast/frames/pss/service/et/
- Power Net at https://engines.cat.com/infocast/frames/truck/service/catet/
Show/hide table
Illustration 1 | g00911591 |
- Select Downloads from one of the listed web sites.
Show/hide table
Illustration 2 | g00911594 |
- Select ET 2002A SP1 Upgrade (8.33 MB) from the Download Options drop-down menu.
Show/hide table
Illustration 3 | g00911595 |
- Select Save this program to disk.
- Select OK.
- Choose a directory on the hard drive of your PC for saving the software upgrade for the Cat ET 2002A Service Pack 1. Downloading will begin.
- Once the file is downloaded to the PC, double click the icon in order to install the software upgrade.
- Follow the instructions on the screen.
Caterpillar Dealer Channel Systems Service Center
Caterpillar Information System:
C9 Urban Transit Bus Engine Customer Specified Parameters Table
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Filter
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Relief Valve
C9 Marine Auxiliary and Generator Set Engines Aftercooler Condensate Drain Valve - Inspect/Clean
C-15 Truck Engine Wastegate Solenoid
C-10 and C-12 Truck Engines Fuel System
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
C-15 Truck Engine Fuel Filter Base
C-10, C-12 and C-15 On-highway Engines Customer Specified Parameters Table
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Camshaft Bearing Position
C-10 and C-12 Truck Engines Air Inlet and Exhaust System
G3500B Engines Electronic Control Module (ECM) - 20 Cylinders
2002/08/01 Relocation Of The Service Center For 3600 Fuel Injectors {1254}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Alternator and Regulator
Torque Specifications Air Brake Fittings
Torque Specifications Bulkhead Nuts
Torque Specifications Ground Engaging Tool (G.E.T.) Fasteners
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Electrical System
3512B Marine Auxiliary Engine Manual Barring Group - Air Interlock
C-18 Truck Engines Engine Operation
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System - Prime
C-15 Truck Engine Electric Starting Motor
C-18 Truck Engines Customer Specified Parameters