323F Excavator Caterpillar


Access Door and Cover Locations

Usage:

323F KBY

Motortérfedél



Illusztráció 1g06182683
(1) Fogantyú
(2) Retesz
(3) Gázrugó

  1. Nyissa ki a motortér fedelét.

  2. Nyissa fel teljesen a motortér fedelét. A gázrugó (3) a helyén rögzül ahhoz, hogy megtartsa a motortérfedelet nyitott helyzetben.

    ------ FIGYELMEZTETÉS! ------

    A kioldó nyomógomb működtetése a szerelőajtó zárásához

    A szerelőajtó zárásakor kizárólag kézzel nyomja meg a kioldó nyomógombot.

    Ha nem veszi el a kezét a kioldó nyomógombról a szerelőajtó bezárása előtt, személyi sérülések veszélye áll fenn.

    Vigyázzon arra, hogy a szerelőajtó bezárása előtt vegye le teljesen kezét a kioldó nyomógombról.



    FIGYELMEZTETÉS

    Ne fejtsen ki nyomást a nyitott motortérfedélre.


    ------ FIGYELMEZTETÉS! ------

    A szerelőajtó zárásakor ne használja a lábát a kioldó nyomógomb működtetéséhez.

    A kioldó nyomógomb lábbal történő működtetése károsíthatja a zárómechanizmus gázrugóját, és/vagy személyi sérülést okozhat.

    A kioldó nyomógombot kizárólag kézzel működtesse a szerelőajtó zárásakor.


  3. A motortérfedél bezárásához támassza azt meg. Nyomja meg a kioldó nyomógombot a gázrugó (3) kioldásához. Engedje fel a gombot, majd lassan zárja le a motortérfedelet.

  4. Reteszelje a motortér fedelét.

Bal oldal



Illusztráció 2g03731466
Jellemző példa a gép bal oldaláról.

(1) Fülkeajtó

(2) A fülke levegőszűrőjének szerelőajtaja

(3) Bal oldali szerelőajtó

Jobb oldal



Illusztráció 3g06205029
Jellemző példa a gép jobb oldaláról.

(4) Jobb oldali szerelőajtó

(5) DEF-tartály tárolódoboza és üzemanyag-továbbító szivattyú (ha van)

Caterpillar Information System:

DE Series Generator Set With Cat C7.1 Engine Refill Capacities and Recommendations
DE Series Generator Set With Cat C7.1 Engine Model View Illustrations
DE Series Generator Set With Cat C7.1 Engine Safety Messages
Installation Procedure for 361-6849 Front Lines Gp on Certain 320D and 320D2 Hydraulic Excavators{5057} Installation Procedure for 361-6849 Front Lines Gp on Certain 320D and 320D2 Hydraulic Excavators{5057}
Master Guide for Field Installation of the 457-9314 Tool Control Arrangement on Certain 320D2 Hydraulic Excavators{1408, 5057, 5059} Master Guide for Field Installation of the 457-9314 Tool Control Arrangement on Certain 320D2 Hydraulic Excavators{1408, 5057, 5059}
336D2 XE Excavator Solenoid Valve (Switch Controlled) - Test
336D2 XE Excavator General Information
336D2 XE Excavator Event Codes
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System Oil Filter (Return) - Replace
725C2 and 730C2 Articulated Truck Machine System Front Frame and Rear Frame - Connect
Dual Lock Tilt Coupler (8 Ton){6129} Dual Lock Tilt Coupler (8 Ton){6129}
538 Forest Machine Maintenance Interval Schedule
Installation Procedure for 456-2993 Chassis Wiring Gp "Quick Coupler" for Certain Hydraulic Excavators{1408} Installation Procedure for 456-2993 Chassis Wiring Gp "Quick Coupler" for Certain Hydraulic Excavators{1408}
352F Excavator Plate Locations and Film Locations
349F XE and 352F XE Excavators Specifications
349F XE and 352F XE Excavators Boom/Stick/Bucket Combinations
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547} Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
349F XE and 352F XE Excavators Declaration of Conformity
349F XE and 352F XE Excavators Additional Messages
M318F, M320F and M322F Wheeled Excavators Hydraulic System Main Control Valve (Unloading Valve) - Check
Location of The 456-4551 Plate and Spacer Installation Gp {6547} Location of The 456-4551 Plate and Spacer Installation Gp {6547}
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Remove and Install
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Disassemble
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547} Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.