Gear and Bearing - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 3     |
Start By:
- Remove the housing and the gear and bearing. Refer to Disassembly and Assembly, "Housing (Upper) - Remove and Install".
- Remove bolts (1) .
Show/hide table
Illustration 1 | g01190001 |
- Use Tooling (A) and a suitable lifting device to remove gear and bearing (2). The weight of gear and bearing (2) for CZC184-Up and, CZD281-Up is approximately 64 kg (140 lb).
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7574     | Link Bracket     | 3     |
B     | 154-9731     | Thread Lock Compound     | 1     |
- Use Tooling (A) and a suitable lifting device to install gear and bearing (2). The weight of gear and bearing (2) for CZC184-Up and, CZD281-Up is approximately 64 kg (140 lb).
Show/hide table
Illustration 2 | g01190001 |
- Apply Tooling (B), or the equivalent to bolts (1) and install bolts (1). Tighten bolts (1) to a torque of 270 ± 40 N·m (199 ± 30 lb ft).
End By: Install the housing and the gear and bearing. Refer to Disassembly and Assembly, "Housing, Gear and Bearing - Remove and Install".
Caterpillar Information System:
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Rotator Motor and Manifold - Install
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Swivel - Assemble
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Hydraulic Rotator - Remove
374F Excavator Machine System Pressure Switch (Refrigerant Pressure Cutoff)
324D and 325D Forest Machines Machine Systems Window Wiper Motor - Remove and Install
323D Excavator Specifications
2006/06/05 Correction to Testing and Adjusting , "Relief Valve (Main) - Test and Adjust (Heavy Lift)" {5069, 5069, 5069}
C4.4 Industrial Engine Engine Valve Lash - Inspect/Adjust
C11 and C13 Engines Muffler
2006/11/20 Secondary Cab Door Release Lever {7308}
3176C Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
2006/07/03 Installation of an Additional Isolation Valve Prevents Bucket Cylinder Drift {1329, 5057, 5143}
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector Rocker Arm
308C CR, 314C CR and 321C CR Excavators Air Conditioning and Heating Air Conditioner Lines
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Gear and Bearing - Remove and Install
324D and 325D Forest Machines Machine Systems Cab - Remove
324D and 325D Forest Machines Machine Systems Pump and Motor (Cab Tilt) - Remove and Install
C11 and C13 Engines Liquid Level Sensor (Water Separator)
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2185 - FMI 03
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2185 - FMI 05
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2185 - FMI 06
C4.4 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
2006/10/02 The Operation of the Quick Coupler Valve Is Improved {5491}
M313D, M315D, M316D, M318D and M322D Excavators and M316D MHPU Mobile Hydraulic Power Unit Electronic System MID 039 - CID 2213 - FMI 03