Usage:
For installation:
a. Put clean engine oil on cylinder block liner bore surfaces and rubber seals on the lower part of the liner.
b. Put the filler band completely in clean engine oil for a moment.
c. Install filler band (1) in the groove under the liner flange, without delay.
d. Install the liner in the bore immediately, before expansion of the filler band.
(1) Filler Band.
(2) O-Ring Seals.
(3) Thickness of flange on liner ... 10.282 ± 0.020 mm (.4048 ± .0008 in)
"Use again" minimum thickness ... 10.262 mm (.4040 in)
(4) Bore in liner (new) ... 120.675 ± 0.037 mm (4.7510 ± .0015 in)
NOTE: Make reference to Guideline For Reusable Parts; Pistons And Cylinder Liners, SEBF8049 and SEBF8068.
NOTE: If there is a block erosion in the area of the cylinder liner O-rings, the block can be machined and an insert installed.