Expansion Tank - Remove and Install
Removal Procedure
- Open the access door on the front left side of the machine.
Show/hide table
Illustration 1 | g00100862 |
- Remove hose (1) that connects the expansion tank (3) to the radiator. Remove hose (2) from the expansion tank.
Show/hide table
Illustration 2 | g00601684 |
- Disconnect electrical connection (4) from the expansion tank (3). Remove the bolt and washer (5) .
Show/hide table
Illustration 3 | g00601689 |
- Remove two bolts and washers (7) and remove the bracket (6). Remove the expansion tank from the machine.
Show/hide table
Illustration 4 | g00601690 |
Installation Procedure
- Place the expansion tank (3) in position. Place the bracket (6) in position and install two bolts and washers (7) .
Show/hide table
Illustration 5 | g00601690 |
- Install the bolt and washer (5). Connect electrical connection (4) to the expansion tank (3).
Show/hide table
Illustration 6 | g00601689 |
- Install hose (1) that connects the expansion tank (3) to the radiator. Install hose (2) to the expansion tank.
Show/hide table
Illustration 7 | g00601684 |
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
3126B Engine for Caterpillar Built Machines Coolant Temperature Sensor
3176C and 3196 Engines for Caterpillar Built Machines Fuel Temperature Sensor - If Equipped
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0542 - FMI 02 Unfiltered Engine Oil Pressure misinstalled
318B Excavator Machine System Specifications Stick Cylinder
318B Excavator Machine System Specifications Bucket Cylinder
322B, 322B L, 325B and 325B L Excavators Maintenance Interval Schedule
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Pilot Hydraulic System
318B Excavator Machine System Specifications Swing Motor
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Housing (Front) - Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Balancer Shaft Bearings - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Housing (Front) - Remove
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Pilot Control Valve (Auxiliary)
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Shutoff Solenoid
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Remove
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel Conservation Practices
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Relief Valve (One-Way Hydraulic Flow)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
365B and 365B Series II Excavators Supplement for 3196 Engine Crankcase Breather - Remove and Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Stick) - Remove
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068} Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
5230B Excavator Fire Extinguisher Location