After Failure Only
| PRODUCT SUPPORT PROGRAM FOR REPLACING THE SHORT BLOCK ON CERTAIN 312D, 313D 2, AND 318D 2 EXCAVATORS |
1000 1052 1100 1202 1304 1361 1405 1453 |
PS52761 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program can only be administered after a failure occurs.
The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52761" as the Part Number
and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The existing cylinder block main bearing caps can fail on certain 312D, 313D 2, and 318D 2 Excavators. If the existing cylinder block main bearing caps fail it can lead to a crankshaft failure which will require the replacement of the short block. |
Qty |
Part Number |
Description |
1 |
1R1807 |
FILTER-LUBE |
1 |
7W4642 |
SHIELD-DUST |
1 |
0676213 |
GASKET |
1 |
1945390 |
GASKET-MANIFOLD |
1 |
1999267 |
SEAL-O-RING |
7 |
2255501 |
BOLT |
3 |
2255502 |
BOLT |
1 |
2256005 |
GASKET |
2 |
2257944 |
GASKET-FLTR HEAD |
1 |
2258536 |
GASKET-MANIFOLD |
1 |
2470144 |
PUMP KIT |
1 |
2584946 |
GASKET-HEAD |
1 |
2773012 |
GASKET-COVER |
1 |
2880422 |
SEAL-OIL (FRONT) |
1 |
3533477 |
GASKET-TURBO |
1 |
3533478 |
GASKET-TURBO |
1 |
3590734 |
BLOCK GP-SHORT |
1 |
BULK_COOLANT |
ENGINE COOLANT 20 L (SEE OMM) (AS NEEDED) |
1 |
BULK_OIL |
ENGINE OIL 16 L (SEE OMM) |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
1. Remove the engine. Refer to Disassembly and Assembly, "Engine - Remove".
2. Replace the short block. Refer to Disassembly and Assembly, SENR5069, "3054C Engines for Caterpillar Built Machines".
3. Install the engine. Refer to Disassembly and Assembly, "Engine - Install". |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-3000 hrs, 0-36 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 45.0-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|