Water Outlet Manifold - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Inspect the condition of the gasket. Replace the gasket, if necessary.
Show/hide table
Illustration 1 | g00553902 |
- Install water temperature regulator housing (5) and the gasket on the cylinder head.
- Install seven bolts (4) that hold water temperature regulator housing (5) .
- Connect hose (3) to the water pump and tighten clamp (2) .
Show/hide table
Illustration 2 | g00553901 |
- Install clamp (1) for the boost line.
- Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual for the correct procedure.
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Water Outlet Manifold - Remove
Generator Set Control Panel for Switchgear Conversion Accessing Diagnostic Information
3408E and 3412E Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
797 Off-Highway Truck Hydraulic System Relief Valve (Hoist)
3408E and 3412E Engines for Caterpillar Built Machines Front Cover - Remove
Generator Set Control Panel for Switchgear Conversion Units Mode
3054 and 3056 Industrial and Generator Set Engines Engine Oil Pump
3054 Engine for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
3608 Engine Engine Oil Pan - Disassemble
Generator Set Control Panel for Switchgear Conversion Tattletale Mode
3054 and 3056 Industrial and Generator Set Engines Engine Oil Cooler - Install
3054 Engine for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
SR4 HV and SR4B HV Generators Insulation - Test
Generator Set Control Panel for Switchgear Conversion Troubleshooting Diagnostic Codes
3054 Engine for Caterpillar Built Machines Cylinder Liner - Remove
3054 Engine for Caterpillar Built Machines Cylinder Liner - Install
Generator Set Control Panel for Switchgear Conversion Initial Troubleshooting Procedure
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Remove
Generator Set Control Panel for Switchgear Conversion LH/RH Switch - Troubleshoot
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Install
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
Control Console For CPS361 Pumper, Cement General Information
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Assemble
Generator Set Control Panel for Switchgear Conversion Scroll Switch - Troubleshoot