Engine Oil Cooler - Remove
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Drain the engine coolant from the engine. Use a suitable container for the storage and the disposal of the coolant.
Show/hide table
Illustration 1 g00545084 Show/hide tableIllustration 2 g00545185 - Remove six bolts (2) and six bolts (3) from the engine oil cooler.
- Remove engine oil cooler bonnet (4). Remove gasket (1). Remove gasket (5). Remove adapter (6). Remove the seal on the adapter.
Show/hide table
Illustration 3 g00545186 - Remove four bolts (9). Remove engine oil cooler (7). Remove the O-ring seals.
- Remove adapter (8) and the O-ring seals.
- Clean the tubes of engine oil cooler core (7) with a
3.2 mm (.126 inch) rod.
Caterpillar Information System:
3054 Engine for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
SR4 HV and SR4B HV Generators Glossary
3412E and C30 Marine Engines Front Power Take-Off (FPTO)
3054 Engine for Caterpillar Built Machines Fuel Transfer Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
3406C (PEEC III) Truck Engines Engine Vibration Troubleshooting
3054 Engine for Caterpillar Built Machines Fuel Transfer Pump - Disassemble
G3606 and G3608 Engines Water Pump - Assemble
3412E and C30 Marine Engines Air Starting System
G3606 and G3608 Engines Water Pump - Disassemble
G3606 and G3608 Engines Water Pump - Install
797 Off-Highway Truck Steering System Check Valve (Steering)
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Nozzles - Remove
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Nozzles - Install
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Cooler - Install
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Pump - Install
3054 Engine for Caterpillar Built Machines Turbocharger - Remove
3054 Engine for Caterpillar Built Machines Turbocharger - Install
3054 Engine for Caterpillar Built Machines Turbocharger - Disassemble
G3606 and G3608 Engines Water Pump Seal - Remove
3054 Engine for Caterpillar Built Machines Turbocharger - Assemble
3054 and 3056 Industrial and Generator Set Engines Inlet Manifold - Remove
3612 and 3616 Fast Vessel Engines Hourly Performance Log